- 09 Jul, 2015 2 commits
-
-
jow authored
During certificate verification, OpenSSL (starting from version 1.0.1n and 1.0.2b) will attempt to find an alternative certificate chain if the first attempt to build such a chain fails. An error in the implementation of this logic can mean that an attacker could cause certain checks on untrusted certificates to be bypassed, such as the CA flag, enabling them to use a valid leaf certificate to act as a CA and "issue" an invalid certificate. This issue will impact any application that verifies certificates including SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication. Signed-off-by:
Jo-Philipp Wich <jow@openwrt.org> Backport of r46285 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46286 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Add features ext4 targz to target x86/xen_domu in order to generate images in defconfig. This fixes #18074. Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Backport of r46233 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46277 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 08 Jul, 2015 5 commits
-
-
rmilecki authored
Now we support NVRAM whatever its size is. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Backport of r46262 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46263 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Use actual partition size and content offset to calculate it. Signed-off-by:
-
rmilecki authored
This reverts commit r45579. With the latest change r46251 ("nvram: fix "Segmentation fault" caused by setting memory out of buffer") nvram utility shouldn't crash anymore. It was tested on 3 brcm47xx devices: 1) Unknown with 0x10000 NVRAM size (0x8000 offset) 2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset) 3) Linksys WRT300N V1 with 0x10000 (0x8000 offset) And 3 bcm53xx devices: 1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size 2) Buffalo WZR-1750DHP with 0x10000 NVRAM size 3) Netgear R6250 V1 with 0x180000 NVRAM size (all using 0 offset) This is an important change as it allows reading whole NVRAM. This may critical when reading some basic configuration (e.g. switch ports). Signed-off-by: -
rmilecki authored
Some MTD partitions with NVRAM have content starting in the middle. In such case offset is set and nvram_header returns pointer to the middle. It means we have to respect offset when calculating remaining space. By the way use real MTD partition size (nvram_part_size variable) as we may want to bump NVRAM_SPACE in the (very near) future. Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
- 07 Jul, 2015 2 commits
-
-
nbd authored
r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range extender") introduced a pdata based modification of the tx_clk_dly. But it was not checked if pdata actually existed. This caused a page fault on all devices which didn't have at803x_platform_data specified for an at803x based device. Signed-off-by:Sven Eckelmann <sven@open-mesh.com> Backport of r46200 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46252 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
lookup_target was trampling the $feed variable, resulting in the -p flag no longer preferentially installing from the named feed. Make sure to use a local variable for this instead. Signed-off-by:
Karl Palsson <karlp@remake.is> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46213 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 04 Jul, 2015 1 commit
-
-
jogo authored
sd_mod depends on scsi_mod, but due to it being an AutoLoad and not AutoProbe module, it was not loading when installing the package, causing unknown symbol errors for sd_mod and anything depending on it. Closes #14927, #18293, #19351. Backport of r46176. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46177 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 03 Jul, 2015 1 commit
-
-
jow authored
The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which will not work outside of the original build environment. Replace the hardcoded staging_dir occurences with paths relative to the $STAGING_DIR environment variable to make the g++-uc* wrappers usable in an SDK environment. Fixes the libdb47 build failure reported at https://lists.openwrt.org/pipermail/openwrt-devel/2015-April/032455.htmlSigned-off-by:
-
- 02 Jul, 2015 2 commits
-
-
nbd authored
A long time ago, ath9k had issues during reset where the DMA engine would stay active and could potentially corrupt memory. To debug those issues, the driver would print warnings whenever they occur. Nowadays, these issues are gone and the primary cause of these messages is if the MAC is stuck during reset or busy processing a long transmission. This is fairly harmless, yet these messages continue to worry users. To reduce the number of bogus bug reports, turn these messages into debug messages and count their occurence in the "reset" debugfs file. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Backport of r46158 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46159 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
- 01 Jul, 2015 3 commits
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Backport of r46150. Signed-off-by:
-
jogo authored
This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons"). Fixes #19858. Backport of r46149. Signed-off-by: -
jogo authored
Also move it to an earlier place so new boards added are less likely to confuse quilt. Fixes #19965. Backport of r46148. Signed-off-by:
-
- 29 Jun, 2015 3 commits
-
-
blogic authored
This reverts commit ac3184da. Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46144 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This reverts commit e3326c44. Signed-off-by:
-
blogic authored
This reverts commit 27386b74. Signed-off-by:
-
- 22 Jun, 2015 1 commit
-
-
rmilecki authored
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by:
-
- 21 Jun, 2015 13 commits
-
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
There are two important patches in this patchset: updating read pointer quicker & rework of .get_station(). There are few more upstream patches that are p2p-related and weren't backported in this commit. Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
This drops some debugging pr_info and adds platform_device_unregister. Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable") Signed-off-by: -
rmilecki authored
Signed-off-by:
-
rmilecki authored
Allocating huge buffer for the whole TRX wasn't too optimal. Signed-off-by:
-
rmilecki authored
So far we got only one generic function accessing this table, but implementing optimizations will require calculating crc32 in other code parts as well. Signed-off-by:
-
nbd authored
Signed-off-by:
-
- 19 Jun, 2015 1 commit
-
-
kaloz authored
Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46062 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 18 Jun, 2015 6 commits
-
-
blogic authored
Signed-off-by:
Cristian Morales Vega <cristian@samknows.com> Backport of r46050 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46060 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Christian Beier <cb@shoutrlabs.com> Backport of r46049 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46059 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by:
Yousong Zhou <yszhou4tech@gmail.com> Backport of r46046 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46056 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize erase 0x9f680000 +1 cp.b $fileaddr 0x9f030000 $filesize Signed-off-by:
Christian Mehlis <christian@m3hlis.de> Backport of r46045 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46055 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
