- 29 Aug, 2015 4 commits
-
-
hauke authored
backport of r46749 Without this patch adding the wifi device to the bridge may fail because the bridge is not already configured when the wifi device gets configured. This patch makes broadcom-wl wait till the bridge is ready. This fixes #17262 Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46750 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
hauke authored
Backport of r46746 This fixes #17495 Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by:
-
hauke authored
Backport of r46745 Signed-off-by:
-
rmilecki authored
Drop unwanted suffix (copy & paste mistake). Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Backport of r46742 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46743 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 27 Aug, 2015 1 commit
-
-
rmilecki authored
Signed-off-by:
-
- 26 Aug, 2015 4 commits
-
-
rmilecki authored
This also adds one patchset of pending changes that fix support for multiple interfaces. It was somehow broken. Driver couldn't correctly match firmware and system interfaces resulting in not working APs and WARNINGs. Signed-off-by:
-
rmilecki authored
This prepares some place for backporting extra patches. Signed-off-by:
-
rmilecki authored
Backport of r46363 r46730 r46731 r46732. Signed-off-by:
-
jogo authored
/etc/uci-defaults/02_network had a typo, making it generate the wrong network config. Closes #20407. Backport of r46727. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46728 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 23 Aug, 2015 3 commits
-
-
jogo authored
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without generic phy support. Backport of r46711. Signed-off-by:
-
jogo authored
The ipw2x00 drivers assume that the system they are running is little endian, and access everything in native byte order. When run on a big endian system, everything breaks apart. Since fixing this is non trivial on a first glance, disable them for big endian targets. Backport of r46708. Signed-off-by:
-
jogo authored
Some CFEs seem to misconfigure the mapped memory flash access with fast read but without a dummy byte, causing all accesses to be prefixed with 0xff. This of course breaks reading out the nvram, so do not just move back to single i/o accessors, but also ensure that the dummy byte is correctly set. Backport of r46707. Signed-off-by:
-
- 21 Aug, 2015 1 commit
-
-
kaloz authored
Thanks Sebastian for spotting it. Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46698 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 20 Aug, 2015 1 commit
-
-
kaloz authored
Signed-off-by:
-
- 19 Aug, 2015 3 commits
-
-
kaloz authored
Signed-off-by:
-
kaloz authored
The u-boot boot counter was never reset after a successful boot, which sometimes could make some variables become out of sync. This patch adds support for the boot counter and enables auto_recovery unconditionally. Signed-off-by:
Rob Mosher <nyt-openwrt@countercultured.net> Signed-off-by:
-
kaloz authored
backport of r46688 Signed-off-by:
-
- 18 Aug, 2015 1 commit
-
-
kaloz authored
Signed-off-by:
-
- 17 Aug, 2015 7 commits
-
-
hauke authored
Backport of 46603. This adds support for symbol versioning which is needed on CentOs/RedHat 7 to fix #20134. Signed-off-by:
-
hauke authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20Signed-off-by:
-
hauke authored
Backport of r46612. fix generating syscall-names.h Sometimes the syscall number is not defined with a number but with an offset to an other syscall and then make_syscall_h.sh created some broken header file. For example the bit/syscall.h from musl for i386 has this: #define __NR_timer_create 259 #define __NR_timer_settime (__NR_timer_create+1) With this patch the resulting array looks like this: [259] = "timer_create", [(__NR_timer_create+1)] = "timer_settime", This closes #20195. Signed-off-by:
-
jow authored
Signed-off-by:
Jo-Philipp Wich <jow@openwrt.org> Backport of r46677 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46678 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
fixes 2 bugs * typo * use %04d rather than %d when printing the position Signed-off-by:
John Crispin <blogic@openwrt.org> Backport of r46666 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46675 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patchSigned-off-by:
Bruno Randolf <br1@einfach.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46674 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Kinda-backport of r46415, though this patch uses the old-style calibration data loading. Signed-off-by:
Christian Beier <cb@shoutrlabs.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46673 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 13 Aug, 2015 2 commits
-
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Backport of r46589 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46591 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
- 12 Aug, 2015 3 commits
-
-
rmilecki authored
According to the info from NVRAM we should use port 8 for the CPU (and interface eth2). Unfortunately it doesn't work right now, so lets switch to the port 5. Signed-off-by:
-
rmilecki authored
We got check for nvram_len placed too early and the code never tried reading CFE variables used on WGT634U. This is a regression introduced in r45942 and reported in #20291. Signed-off-by:
-
rmilecki authored
It was missed in the r46471. Signed-off-by:
-
- 10 Aug, 2015 2 commits
-
-
rmilecki authored
this is required by the new button timeout feature Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
- 09 Aug, 2015 1 commit
-
-
hauke authored
The name of the module was wrong before. This should fix #20283. backport of r46574. Signed-off-by:
-
- 03 Aug, 2015 2 commits
-
-
blogic authored
Signed-off-by:
Günther Kelleter <guenther.kelleter@devolo.de> Backport of r46414 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46549 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Backport of r46458 to CC https://onion.io/omegaSigned-off-by:
L. D. Pinney <ldpinney@gmail.com> Acked-by:
Boken Lin <bl@onion.io> Tested-by:
Jacky Huang <huangfangcheng@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46548 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 02 Aug, 2015 1 commit
-
-
nbd authored
This patch fixes weak radio signal reported by nikola.georgiev Signed-off-by:
-
- 01 Aug, 2015 1 commit
-
-
nbd authored
Signed-off-by:
-
- 31 Jul, 2015 3 commits
-
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46537 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
kaloz authored
Fix for default button states in WRT1900AC dts files. This prevents overlay wipe when reset is pressed. Signed-off-by:
-
kaloz authored
Signed-off-by:
-
