Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.

This fixes #18074.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

Backport of r46233

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46277 3c298f89-4303-0410-b956-a3cf2f4a3e73

Now we support NVRAM whatever its size is.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46262

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46263 3c298f89-4303-0410-b956-a3cf2f4a3e73

Use actual partition size and content offset to calculate it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46260

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46261 3c298f89-4303-0410-b956-a3cf2f4a3e73

This reverts commit r45579.

With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.

It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)

And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)

This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46253

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46259 3c298f89-4303-0410-b956-a3cf2f4a3e73

Some MTD partitions with NVRAM have content starting in the middle. In
such case offset is set and nvram_header returns pointer to the middle.
It means we have to respect offset when calculating remaining space.

By the way use real MTD partition size (nvram_part_size variable) as we
may want to bump NVRAM_SPACE in the (very near) future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46251

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46258 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46212

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46257 3c298f89-4303-0410-b956-a3cf2f4a3e73

r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range
extender") introduced a pdata based modification of the tx_clk_dly. But it
was not checked if pdata actually existed. This caused a page fault on all
devices which didn't have at803x_platform_data specified for an at803x
based device.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

Backport of r46200

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46252 3c298f89-4303-0410-b956-a3cf2f4a3e73

lookup_target was trampling the $feed variable, resulting in the -p flag
no longer preferentially installing from the named feed.

Make sure to use a local variable for this instead.
Signed-off-by: Karl Palsson <karlp@remake.is>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46213 3c298f89-4303-0410-b956-a3cf2f4a3e73

sd_mod depends on scsi_mod, but due to it being an AutoLoad and not
AutoProbe module, it was not loading when installing the package,
causing unknown symbol errors for sd_mod and anything depending on it.

Closes #14927, #18293, #19351.

Backport of r46176.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46177 3c298f89-4303-0410-b956-a3cf2f4a3e73

The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which
will not work outside of the original build environment.

Replace the hardcoded staging_dir occurences with paths relative to the
$STAGING_DIR environment variable to make the g++-uc* wrappers usable in an
SDK environment.

Fixes the libdb47 build failure reported at
  https://lists.openwrt.org/pipermail/openwrt-devel/2015-April/032455.htmlSigned-off-by: Jo-Philipp Wich <jow@openwrt.org>

Backport of r46162

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46163 3c298f89-4303-0410-b956-a3cf2f4a3e73

A long time ago, ath9k had issues during reset where the DMA engine
would stay active and could potentially corrupt memory.
To debug those issues, the driver would print warnings whenever they
occur.

Nowadays, these issues are gone and the primary cause of these messages
is if the MAC is stuck during reset or busy processing a long
transmission. This is fairly harmless, yet these messages continue to
worry users.

To reduce the number of bogus bug reports, turn these messages into
debug messages and count their occurence in the "reset" debugfs file.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

Backport of r46158

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46159 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

Backport of r46156

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46157 3c298f89-4303-0410-b956-a3cf2f4a3e73

Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Backport of r46150.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46155 3c298f89-4303-0410-b956-a3cf2f4a3e73

This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons").

Fixes #19858.

Backport of r46149.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46154 3c298f89-4303-0410-b956-a3cf2f4a3e73

Also move it to an earlier place so new boards added are less likely
to confuse quilt.

Fixes #19965.

Backport of r46148.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46153 3c298f89-4303-0410-b956-a3cf2f4a3e73

This reverts commit ac3184da.
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46144 3c298f89-4303-0410-b956-a3cf2f4a3e73

This reverts commit e3326c44.
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46143 3c298f89-4303-0410-b956-a3cf2f4a3e73

This reverts commit 27386b74.
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46142 3c298f89-4303-0410-b956-a3cf2f4a3e73

On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46104

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46107 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46088

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46103 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46087

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46102 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46086

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46101 3c298f89-4303-0410-b956-a3cf2f4a3e73

There are two important patches in this patchset: updating read pointer
quicker & rework of .get_station().
There are few more upstream patches that are p2p-related and weren't
backported in this commit.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46084

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46100 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46083

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46099 3c298f89-4303-0410-b956-a3cf2f4a3e73

This drops some debugging pr_info and adds platform_device_unregister.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46082

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46098 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46081

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46097 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46080

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46096 3c298f89-4303-0410-b956-a3cf2f4a3e73

Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46085

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46095 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46079

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46094 3c298f89-4303-0410-b956-a3cf2f4a3e73

Allocating huge buffer for the whole TRX wasn't too optimal.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46078

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46093 3c298f89-4303-0410-b956-a3cf2f4a3e73

So far we got only one generic function accessing this table, but
implementing optimizations will require calculating crc32 in other code
parts as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

Backport of r46077

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46092 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

Backport of r46090

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46091 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>



git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46062 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Cristian Morales Vega <cristian@samknows.com>

Backport of r46050

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46060 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

Backport of r46049

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46059 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

Backport of r46048

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46058 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

Backport of r46047

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46057 3c298f89-4303-0410-b956-a3cf2f4a3e73

The hardware should be almost the same as TL-WR720N-v3.  WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>".  Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Backport of r46046

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46056 3c298f89-4303-0410-b956-a3cf2f4a3e73

tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

Backport of r46045

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46055 3c298f89-4303-0410-b956-a3cf2f4a3e73

This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s1Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>

Backport of r46044

git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46054 3c298f89-4303-0410-b956-a3cf2f4a3e73