- 04 Jul, 2015 1 commit
-
-
jogo authored
sd_mod depends on scsi_mod, but due to it being an AutoLoad and not AutoProbe module, it was not loading when installing the package, causing unknown symbol errors for sd_mod and anything depending on it. Closes #14927, #18293, #19351. Backport of r46176. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46177 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 03 Jul, 2015 1 commit
-
-
jow authored
The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which will not work outside of the original build environment. Replace the hardcoded staging_dir occurences with paths relative to the $STAGING_DIR environment variable to make the g++-uc* wrappers usable in an SDK environment. Fixes the libdb47 build failure reported at https://lists.openwrt.org/pipermail/openwrt-devel/2015-April/032455.htmlSigned-off-by:
Jo-Philipp Wich <jow@openwrt.org> Backport of r46162 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46163 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 02 Jul, 2015 2 commits
-
-
nbd authored
A long time ago, ath9k had issues during reset where the DMA engine would stay active and could potentially corrupt memory. To debug those issues, the driver would print warnings whenever they occur. Nowadays, these issues are gone and the primary cause of these messages is if the MAC is stuck during reset or busy processing a long transmission. This is fairly harmless, yet these messages continue to worry users. To reduce the number of bogus bug reports, turn these messages into debug messages and count their occurence in the "reset" debugfs file. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Backport of r46158 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46159 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
- 01 Jul, 2015 3 commits
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Backport of r46150. Signed-off-by:
-
jogo authored
This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons"). Fixes #19858. Backport of r46149. Signed-off-by: -
jogo authored
Also move it to an earlier place so new boards added are less likely to confuse quilt. Fixes #19965. Backport of r46148. Signed-off-by:
-
- 29 Jun, 2015 3 commits
-
-
blogic authored
This reverts commit ac3184da. Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46144 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This reverts commit e3326c44. Signed-off-by:
-
blogic authored
This reverts commit 27386b74. Signed-off-by:
-
- 22 Jun, 2015 1 commit
-
-
rmilecki authored
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Backport of r46104 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46107 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 21 Jun, 2015 13 commits
-
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
There are two important patches in this patchset: updating read pointer quicker & rework of .get_station(). There are few more upstream patches that are p2p-related and weren't backported in this commit. Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
This drops some debugging pr_info and adds platform_device_unregister. Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable") Signed-off-by: -
rmilecki authored
Signed-off-by:
-
rmilecki authored
Allocating huge buffer for the whole TRX wasn't too optimal. Signed-off-by:
-
rmilecki authored
So far we got only one generic function accessing this table, but implementing optimizations will require calculating crc32 in other code parts as well. Signed-off-by:
-
nbd authored
Signed-off-by:
-
- 19 Jun, 2015 1 commit
-
-
kaloz authored
Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46062 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- 18 Jun, 2015 13 commits
-
-
blogic authored
Signed-off-by:
Cristian Morales Vega <cristian@samknows.com> Backport of r46050 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46060 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Christian Beier <cb@shoutrlabs.com> Backport of r46049 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46059 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by:
Yousong Zhou <yszhou4tech@gmail.com> Backport of r46046 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46056 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize erase 0x9f680000 +1 cp.b $fileaddr 0x9f030000 $filesize Signed-off-by:
Christian Mehlis <christian@m3hlis.de> Backport of r46045 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46055 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1Signed-off-by:
L. D. Pinney <ldpinney@gmail.com> Acked-by:
James Hilliard <james.hilliard1@gmail.com> Backport of r46044 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46054 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch adds support for the Linksys RE6500 Range Extender http://wiki.openwrt.org/toh/linksys/re6500Signed-off-by:
-
blogic authored
http://wiki.openwrt.org/toh/d-link/dcs-930lSigned-off-by:
-
blogic authored
This patch is for PandoraBox PBR-M1 which is based on mt7621, all the features work fine, including rtc, leds, button, usb3.0, etc. Signed-off-by:
tymon <banglang.huang@foxmail.com> Backport of r46041 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46051 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
- 17 Jun, 2015 2 commits
-
-
jow authored
This is required to use x86/64 in KVM containers with VirtIO disks Signed-off-by:
-
jogo authored
It seems that there are maximum timings for mdio accesses that can be hit when the system is under load and the thread is scheduled during a read or write access. Since there is no way of knowing if this happens as there is not even a parity bit, try to work around it by disabling interrupts during any gpio-mdio accesses. Performance impact seems to be neglectable, as mdio accesses are not that often. Hopefully fixes #19500. Signed-off-by:
-
