ramips: Add support for the D-Link DCS-930 B1

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -85,6 +85,10 @@ case $board in
 		ucidef_set_led_default "power" "POWER" "d105:red:power" "1"
 		set_usb_led "d105:green:usb"
 		;;
+	dcs-930l-b1)
+		ucidef_set_led_default "power" "POWER" "d-link:red:power" "1"
+		ucidef_set_led_netdev "wifi" "WiFi" "d-link:blue:wps"
+		;;
 	dir-300-b1|\
 	dir-600-b1|\
 	dir-600-b2|\

target/linux/ramips/base-files/etc/board.d/02_network

@@ -53,6 +53,7 @@ ramips_setup_interfaces()
 	all5003 | \
 	broadway | \
 	dcs-930| \
+	dcs-930l-b1| \
 	ht-tm02| \
 	ncs601w | \
 	wnce2001)

target/linux/ramips/base-files/etc/diag.sh

@@ -48,6 +48,9 @@ get_status_led() {
 	dcs-930 | dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1| dir-300-b7| dir-320-b1)
 		status_led="d-link:green:status"
 		;;
+	dcs-930l-b1)
+		status_led="d-link:red:power"
+		;;
 	dir-645)
 		status_led="d-link:green:wps"
 		;;

target/linux/ramips/base-files/lib/ramips.sh

@@ -106,6 +106,9 @@ ramips_board_detect() {
 	*"DCS-930")
 		name="dcs-930"
 		;;
+	*"DCS-930L B1")
+		name="dcs-930l-b1"
+		;;
 	*"DIR-300 B1")
 		name="dir-300-b1"
 		;;

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -37,6 +37,7 @@ platform_check_image() {
 	d105 | \
 	dap-1350 | \
 	dcs-930 | \
+	dcs-930l-b1 | \
 	dir-300-b1 | \
 	dir-300-b7 | \
 	dir-320-b1 | \

target/linux/ramips/dts/DCS-930L-B1.dts

+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible =  "DCS-930L-B1", "ralink,rt5350-soc";
+	model = "D-Link DCS-930L B1";
+
+	palmbus@10000000 {
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l3205d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "s25fl064k";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x3b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "jtag", "uartf", "led";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power {
+			label = "d-link:red:power";
+			gpios = <&gpio0 17 1>;
+		};
+		wps {
+			label = "d-link:blue:wps";
+			gpios = <&gpio0 19 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		reset {
+			label = "reset";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x198>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio0 20 1>;
+			linux,code = <0x211>;
+		};
+	};
+};

target/linux/ramips/image/Makefile

@@ -514,6 +514,7 @@ define BuildFirmware/DCS930/squashfs
 endef
 BuildFirmware/DCS930/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
 Image/Build/Profile/DCS930=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930,DCS-930)
+Image/Build/Profile/DCS930LB1=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930l-b1,DCS-930L-B1)
 
 Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)
 
@@ -717,6 +718,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DAP1350,$(1))
 	$(call Image/Build/Profile/DAP1350WW,$(1))
 	$(call Image/Build/Profile/DCS930,$(1))
+	$(call Image/Build/Profile/DCS930LB1,$(1))
 	$(call Image/Build/Profile/ESR-9753,$(1))
 	$(call Image/Build/Profile/F7C027,$(1))
 	$(call Image/Build/Profile/F5D8235V2,$(1))

target/linux/ramips/rt305x/profiles/dlink.mk

@@ -44,6 +44,19 @@ endef
 
 $(eval $(call Profile,DCS930))
 
+define Profile/DCS930LB1
+	NAME:=Dlink DCS-930L B1
+        PACKAGES:=kmod-video-core kmod-video-uvc \
+		kmod-sound-core kmod-usb-audio \
+		kmod-usb-core kmod-usb-ohci kmod-usb2
+endef
+
+define Profile/DCS930LB1/Description
+	Package set for Dlink DCS-930L B1 board
+endef
+
+$(eval $(call Profile,DCS930LB1))
+
 define Profile/DIR610A1
 	NAME:=Dlink DIR-610 A1
 	PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer