GitLab LDAP integration
GitLab can be configured to allow your users to sign with their LDAP credentials to integrate with e.g. Active Directory.
The first time a user signs in with LDAP credentials, GitLab will create a new GitLab user associated with the LDAP Distinguished Name (DN) of the LDAP user.
GitLab user attributes such as nickname and email will be copied from the LDAP user entry.
Security
GitLab assumes that LDAP users are not able to change their LDAP 'mail', 'email' or 'userPrincipalName' attribute. An LDAP user who is allowed to change their email on the LDAP server can take over any account on your GitLab server.
We recommend against using GitLab LDAP integration if your LDAP users are allowed to change their 'mail', 'email' or 'userPrincipalName' attribute on the LDAP server.
If a user is deleted from the LDAP server, they will be blocked in GitLab as well. Users will be immediately blocked from logging in. However, there is an LDAP check cache time of one hour. The means users that are already logged in or are using Git over SSH will still be able to access GitLab for up to one hour. Manually block the user in the GitLab Admin area to immediately block all access.
Configuring GitLab for LDAP integration
To enable GitLab LDAP integration you need to add your LDAP server settings in /etc/gitlab/gitlab.rb
or /home/git/gitlab/config/gitlab.yml
.
In GitLab Enterprise Edition you can have multiple LDAP servers connected to one GitLab server.
Please note that before version 7.4, GitLab used a different syntax for configuring LDAP integration.
The old LDAP integration syntax still works in GitLab 7.4.
If your gitlab.rb
or gitlab.yml
file contains LDAP settings in both the old syntax and the new syntax, only the old syntax will be used by GitLab.
# For omnibus packages
gitlab_rails['ldap_enabled'] = true
gitlab_rails['ldap_servers'] = YAML.load <<-EOS # remember to close this block with 'EOS' below
main: # 'main' is the GitLab 'provider ID' of this LDAP server
## label
#
# A human-friendly name for your LDAP server. It is OK to change the label later,
# for instance if you find out it is too large to fit on the web page.
#
# Example: 'Paris' or 'Acme, Ltd.'
label: 'LDAP'
host: '_your_ldap_server'
port: 389
uid: 'sAMAccountName'
method: 'plain' # "tls" or "ssl" or "plain"
bind_dn: '_the_full_dn_of_the_user_you_will_bind_with'
password: '_the_password_of_the_bind_user'
# This setting specifies if LDAP server is Active Directory LDAP server.
# For non AD servers it skips the AD specific queries.
# If your LDAP server is not AD, set this to false.
active_directory: true
# If allow_username_or_email_login is enabled, GitLab will ignore everything
# after the first '@' in the LDAP username submitted by the user on login.
#
# Example:
# - the user enters 'jane.doe@example.com' and 'p@ssw0rd' as LDAP credentials;
# - GitLab queries the LDAP server with 'jane.doe' and 'p@ssw0rd'.
#
# If you are using "uid: 'userPrincipalName'" on ActiveDirectory you need to
# disable this setting, because the userPrincipalName contains an '@'.
allow_username_or_email_login: false
# To maintain tight control over the number of active users on your GitLab installation,
# enable this setting to keep new users blocked until they have been cleared by the admin
# (default: false).
block_auto_created_users: false
# Base where we can search for users
#
# Ex. ou=People,dc=gitlab,dc=example
#
base: ''
# Filter LDAP users
#
# Format: RFC 4515 https://tools.ietf.org/search/rfc4515
# Ex. (employeeType=developer)
#
# Note: GitLab does not support omniauth-ldap's custom filter syntax.
#
user_filter: ''
# LDAP attributes that GitLab will use to create an account for the LDAP user.
# The specified attribute can either be the attribute name as a string (e.g. 'mail'),
# or an array of attribute names to try in order (e.g. ['mail', 'email']).
# Note that the user's LDAP login will always be the attribute specified as `uid` above.
attributes:
# The username will be used in paths for the user's own projects
# (like `gitlab.example.com/username/project`) and when mentioning
# them in issues, merge request and comments (like `@username`).
# If the attribute specified for `username` contains an email address,
# the GitLab username will be the part of the email address before the '@'.
username: ['uid', 'userid', 'sAMAccountName']
email: ['mail', 'email', 'userPrincipalName']
# If no full name could be found at the attribute specified for `name`,
# the full name is determined using the attributes specified for
# `first_name` and `last_name`.
name: 'cn'
first_name: 'givenName'
last_name: 'sn'
# GitLab EE only: add more LDAP servers
# Choose an ID made of a-z and 0-9 . This ID will be stored in the database
# so that GitLab can remember which LDAP server a user belongs to.
# uswest2:
# label:
# host:
# ....
EOS
If you are getting 'Connection Refused' errors when trying to connect to the LDAP server please double-check the LDAP port
and method
settings used by GitLab.
Common combinations are method: 'plain'
and port: 389
, OR method: 'ssl'
and port: 636
.
If you are using a GitLab installation from source you can find the LDAP settings in /home/git/gitlab/config/gitlab.yml
:
production:
# snip...
ldap:
enabled: false
servers:
main: # 'main' is the GitLab 'provider ID' of this LDAP server
## label
#
# A human-friendly name for your LDAP server. It is OK to change the label later,
# for instance if you find out it is too large to fit on the web page.
#
# Example: 'Paris' or 'Acme, Ltd.'
label: 'LDAP'
# snip...
Enabling LDAP sign-in for existing GitLab users
When a user signs in to GitLab with LDAP for the first time, and their LDAP email address is the primary email address of an existing GitLab user, then the LDAP DN will be associated with the existing user.
If the LDAP email attribute is not found in GitLab's database, a new user is created.
In other words, if an existing GitLab user wants to enable LDAP sign-in for themselves, they should check that their GitLab email address matches their LDAP email address, and then sign into GitLab via their LDAP credentials.
GitLab recognizes the following LDAP attributes as email addresses: mail
, email
and userPrincipalName
.
If multiple LDAP email attributes are present, e.g. mail: foo@bar.com
and email: foo@example.com
, then the first attribute found wins -- in this case foo@bar.com
.
Using an LDAP filter to limit access to your GitLab server
If you want to limit all GitLab access to a subset of the LDAP users on your LDAP server you can set up an LDAP user filter. The filter must comply with RFC 4515.
# For omnibus packages; new LDAP server syntax
gitlab_rails['ldap_servers'] = YAML.load <<-EOS
main:
# snip...
user_filter: '(employeeType=developer)'
EOS
# For installations from source; new LDAP server syntax
production:
ldap:
servers:
main:
# snip...
user_filter: '(employeeType=developer)'
Tip: if you want to limit access to the nested members of an Active Directory group you can use the following syntax:
(memberOf:1.2.840.113556.1.4.1941:=CN=My Group,DC=Example,DC=com)
Please note that GitLab does not support the custom filter syntax used by omniauth-ldap.
Limitations
GitLab's LDAP client is based on omniauth-ldap
which encapsulates Ruby's Net::LDAP
class. It provides a pure-Ruby implementation
of the LDAP client protocol. As a result, GitLab is limited by omniauth-ldap
and may impact your LDAP
server settings.
TLS Client Authentication
Not implemented by Net::LDAP
.
So you should disable anonymous LDAP authentication and enable simple or SASL
authentication. TLS client authentication setting in your LDAP server cannot be
mandatory and clients cannot be authenticated with the TLS protocol.
TLS Server Authentication
Not supported by GitLab's configuration options.
When setting method: ssl
, the underlying authentication method used by
omniauth-ldap
is simple_tls
. This method establishes TLS encryption with
the LDAP server before any LDAP-protocol data is exchanged but no validation of
the LDAP server's SSL certificate is performed.