BigW Consortium Gitlab

saml.md 12.4 KB

SAML OmniAuth Provider

GitLab can be configured to act as a SAML 2.0 Service Provider (SP). This allows GitLab to consume assertions from a SAML 2.0 Identity Provider (IdP) such as Microsoft ADFS to authenticate users.

First configure SAML 2.0 support in GitLab, then register the GitLab application in your SAML IdP:

  1. Make sure GitLab is configured with HTTPS. See Using HTTPS for instructions.

  2. On your GitLab server, open the configuration file.

    For omnibus package:

      sudo editor /etc/gitlab/gitlab.rb

    For installations from source:

      cd /home/git/gitlab
    
      sudo -u git -H editor config/gitlab.yml
  3. See Initial OmniAuth Configuration for initial settings.

  4. To allow your users to use SAML to sign up without having to manually create an account first, don't forget to add the following values to your configuration:

    For omnibus package:

      gitlab_rails['omniauth_allow_single_sign_on'] = ['saml']
      gitlab_rails['omniauth_block_auto_created_users'] = false

    For installations from source:

      allow_single_sign_on: ["saml"]
      block_auto_created_users: false
  5. You can also automatically link SAML users with existing GitLab users if their email addresses match by adding the following setting:

    For omnibus package:

      gitlab_rails['omniauth_auto_link_saml_user'] = true

    For installations from source:

      auto_link_saml_user: true
  6. Add the provider configuration:

    For omnibus package:

      gitlab_rails['omniauth_providers'] = [
        {
          name: 'saml',
          args: {
                   assertion_consumer_service_url: 'https://gitlab.example.com/users/auth/saml/callback',
                   idp_cert_fingerprint: '43:51:43:a1:b5:fc:8b:b7:0a:3a:a9:b1:0f:66:73:a8',
                   idp_sso_target_url: 'https://login.example.com/idp',
                   issuer: 'https://gitlab.example.com',
                   name_identifier_format: 'urn:oasis:names:tc:SAML:2.0:nameid-format:transient'
                 },
          label: 'Company Login' # optional label for SAML login button, defaults to "Saml"
        }
      ]

    For installations from source:

      - {
          name: 'saml',
          args: {
                 assertion_consumer_service_url: 'https://gitlab.example.com/users/auth/saml/callback',
                 idp_cert_fingerprint: '43:51:43:a1:b5:fc:8b:b7:0a:3a:a9:b1:0f:66:73:a8',
                 idp_sso_target_url: 'https://login.example.com/idp',
                 issuer: 'https://gitlab.example.com',
                 name_identifier_format: 'urn:oasis:names:tc:SAML:2.0:nameid-format:transient'
               },
          label: 'Company Login' # optional label for SAML login button, defaults to "Saml"
        }
  7. Change the value for assertion_consumer_service_url to match the HTTPS endpoint of GitLab (append users/auth/saml/callback to the HTTPS URL of your GitLab installation to generate the correct value).

  8. Change the values of idp_cert_fingerprint, idp_sso_target_url, name_identifier_format to match your IdP. Check the omniauth-saml documentation for details on these options.

  9. Change the value of issuer to a unique name, which will identify the application to the IdP.

  10. Reconfigure or restart GitLab for the changes to take effect if you installed GitLab via Omnibus or from source respectively.

  11. Register the GitLab SP in your SAML 2.0 IdP, using the application name specified in issuer.

To ease configuration, most IdP accept a metadata URL for the application to provide configuration information to the IdP. To build the metadata URL for GitLab, append users/auth/saml/metadata to the HTTPS URL of your GitLab installation, for instance:

   https://gitlab.example.com/users/auth/saml/metadata

At a minimum the IdP must provide a claim containing the user's email address, using claim name email or mail. The email will be used to automatically generate the GitLab username. GitLab will also use claims with name name, first_name, last_name (see the omniauth-saml gem for supported claims).

On the sign in page there should now be a SAML button below the regular sign in form. Click the icon to begin the authentication process. If everything goes well the user will be returned to GitLab and will be signed in.

External Groups

Note: This setting is only available on GitLab 8.7 and above.

SAML login includes support for external groups. You can define in the SAML settings which groups, to which your users belong in your IdP, you wish to be marked as external.

Requirements

First you need to tell GitLab where to look for group information. For this you need to make sure that your IdP server sends a specific AttributeStament along with the regular SAML response. Here is an example:

<saml:AttributeStatement>
  <saml:Attribute Name="Groups">
    <saml:AttributeValue xsi:type="xs:string">SecurityGroup</saml:AttributeValue>
    <saml:AttributeValue xsi:type="xs:string">Developers</saml:AttributeValue>
    <saml:AttributeValue xsi:type="xs:string">Designers</saml:AttributeValue>
  </saml:Attribute>
</saml:AttributeStatement>

The name of the attribute can be anything you like, but it must contain the groups to which a user belongs. In order to tell GitLab where to find these groups, you need to add a groups_attribute: element to your SAML settings. You will also need to tell GitLab which groups are external via the external_groups: element:

{ name: 'saml',
  label: 'Our SAML Provider',
  groups_attribute: 'Groups',
  external_groups: ['Freelancers', 'Interns'],
  args: {
          assertion_consumer_service_url: 'https://gitlab.example.com/users/auth/saml/callback',
          idp_cert_fingerprint: '43:51:43:a1:b5:fc:8b:b7:0a:3a:a9:b1:0f:66:73:a8',
          idp_sso_target_url: 'https://login.example.com/idp',
          issuer: 'https://gitlab.example.com',
          name_identifier_format: 'urn:oasis:names:tc:SAML:2.0:nameid-format:transient'
        } }

Customization

auto_sign_in_with_provider

You can add this setting to your GitLab configuration to automatically redirect you to your SAML server for authentication, thus removing the need to click a button before actually signing in.

For omnibus package:

gitlab_rails['omniauth_auto_sign_in_with_provider'] = 'saml'

For installations from source:

omniauth:
  auto_sign_in_with_provider: saml

Please keep in mind that every sign in attempt will be redirected to the SAML server, so you will not be able to sign in using local credentials. Make sure that at least one of the SAML users has admin permissions.

attribute_statements

Note: This setting is only available on GitLab 8.6 and above. This setting should only be used to map attributes that are part of the OmniAuth info hash schema.

attribute_statements is used to map Attribute Names in a SAMLResponse to entries in the OmniAuth info hash.

For example, if your SAMLResponse contains an Attribute called 'EmailAddress', specify { email: ['EmailAddress'] } to map the Attribute to the corresponding key in the info hash. URI-named Attributes are also supported, e.g. { email: ['http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress'] }.

This setting allows you tell GitLab where to look for certain attributes required to create an account. Like mentioned above, if your IdP sends the user's email address as EmailAddress instead of email, let GitLab know by setting it on your configuration:

args: {
        assertion_consumer_service_url: 'https://gitlab.example.com/users/auth/saml/callback',
        idp_cert_fingerprint: '43:51:43:a1:b5:fc:8b:b7:0a:3a:a9:b1:0f:66:73:a8',
        idp_sso_target_url: 'https://login.example.com/idp',
        issuer: 'https://gitlab.example.com',
        name_identifier_format: 'urn:oasis:names:tc:SAML:2.0:nameid-format:transient',
        attribute_statements: { email: ['EmailAddress'] }
}

allowed_clock_drift

The clock of the Identity Provider may drift slightly ahead of your system clocks. To allow for a small amount of clock drift you can use allowed_clock_drift within your settings. Its value must be given in a number (and/or fraction) of seconds. The value given is added to the current time at which the response is validated.

args: {
        assertion_consumer_service_url: 'https://gitlab.example.com/users/auth/saml/callback',
        idp_cert_fingerprint: '43:51:43:a1:b5:fc:8b:b7:0a:3a:a9:b1:0f:66:73:a8',
        idp_sso_target_url: 'https://login.example.com/idp',
        issuer: 'https://gitlab.example.com',
        name_identifier_format: 'urn:oasis:names:tc:SAML:2.0:nameid-format:transient',
        attribute_statements: { email: ['EmailAddress'] },
        allowed_clock_drift: 1 # for one second clock drift
}

Troubleshooting

500 error after login

If you see a "500 error" in GitLab when you are redirected back from the SAML sign in page, this likely indicates that GitLab could not get the email address for the SAML user.

Make sure the IdP provides a claim containing the user's email address, using claim name email or mail.

Redirect back to login screen with no evident error

If after signing in into your SAML server you are redirected back to the sign in page and no error is displayed, check your production.log file. It will most likely contain the message Can't verify CSRF token authenticity. This means that there is an error during the SAML request, but this error never reaches GitLab due to the CSRF check.

To bypass this you can add skip_before_action :verify_authenticity_token to the omniauth_callbacks_controller.rb file immediately after the class line and comment out the protect_from_forgery line using a # then restart Unicorn. This will allow the error to hit GitLab, where it can then be seen in the usual logs, or as a flash message on the login screen.

That file is located in /opt/gitlab/embedded/service/gitlab-rails/app/controllers for Omnibus installations and by default in /home/git/gitlab/app/controllers for installations from source. Restart Unicorn using the sudo gitlab-ctl restart unicorn command on Omnibus installations and sudo service gitlab restart on installations from source.

You may also find the SSO Tracer (Firefox) and SAML Chrome Panel (Chrome) browser extensions useful in your debugging.

Invalid audience

This error means that the IdP doesn't recognize GitLab as a valid sender and receiver of SAML requests. Make sure to add the GitLab callback URL to the approved audiences of the IdP server.

Missing claims

The IdP server needs to pass certain information in order for GitLab to either create an account, or match the login information to an existing account. email is the minimum amount of information that needs to be passed. If the IdP server is not providing this information, all SAML requests will fail.

Make sure this information is provided.

Key validation error, Digest mismatch or Fingerprint mismatch

These errors all come from a similar place, the SAML certificate. SAML requests need to be validated using a fingerprint, a certificate or a validator.

For this you need take the following into account:

  • If no certificate is provided in the settings, a fingerprint or fingerprint validator needs to be provided and the response from the server must contain a certificate (<ds:KeyInfo><ds:X509Data><ds:X509Certificate>)
  • If a certificate is provided in the settings, it is no longer necessary for the request to contain one. In this case the fingerprint or fingerprint validators are optional

Make sure that one of the above described scenarios is valid, or the requests will fail with one of the mentioned errors.