- Jul 18, 2015
-
-
florian authored
Backport of r46173 Signed-off-by:
Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46418 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
florian authored
We were not copying the additional files needed to get USB to work on the AT91 platforms, make sure we do this. Backport of r46172 Signed-off-by:
-
florian authored
The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported by this PHY driver. Backport of r46171 Signed-off-by:
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46412 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
- Jul 17, 2015
-
-
jow authored
Signed-off-by:
Jo-Philipp Wich <jow@openwrt.org> Backport of r46394 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46395 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 14, 2015
-
-
rmilecki authored
Signed-off-by:
John Crispin <blogic@openwrt.org> This adds support for filtering messages Backport of r46356 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46365 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 13, 2015
-
-
cyrus authored
Signed-off-by:
Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46337 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
Signed-off-by:
-
- Jul 12, 2015
-
-
hauke authored
This fixes the following security vulnerabilities in curl: * CVE-2015-3143 * CVE-2015-3144 * CVE-2015-3145 * CVE-2015-3148 * CVE-2015-3153 * CVE-2015-3236 * CVE-2015-3237 This was fixed in trunk with update to version 7.43.0 in r46169. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46312 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
hauke authored
Backprot of r46179 Signed-off-by:
-
hauke authored
This should fix build of sunxi. Backport of r46304 Signed-off-by:
-
hauke authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18 Backport of r46299, r46303 and r46308. Signed-off-by:
-
- Jul 10, 2015
-
-
nbd authored
See http://patchwork.ozlabs.org/patch/493573/ for more information Signed-off-by:
-
nbd authored
Signed-off-by:
-
- Jul 09, 2015
-
-
rmilecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Backport of r46288 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46290 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
Signed-off-by:
-
jow authored
During certificate verification, OpenSSL (starting from version 1.0.1n and 1.0.2b) will attempt to find an alternative certificate chain if the first attempt to build such a chain fails. An error in the implementation of this logic can mean that an attacker could cause certain checks on untrusted certificates to be bypassed, such as the CA flag, enabling them to use a valid leaf certificate to act as a CA and "issue" an invalid certificate. This issue will impact any application that verifies certificates including SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication. Signed-off-by:
-
blogic authored
Add features ext4 targz to target x86/xen_domu in order to generate images in defconfig. This fixes #18074. Signed-off-by:
Luiz Angelo Daros de Luca <luizluca@gmail.com> Backport of r46233 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46277 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 08, 2015
-
-
rmilecki authored
Now we support NVRAM whatever its size is. Signed-off-by:
-
rmilecki authored
Use actual partition size and content offset to calculate it. Signed-off-by:
-
rmilecki authored
This reverts commit r45579. With the latest change r46251 ("nvram: fix "Segmentation fault" caused by setting memory out of buffer") nvram utility shouldn't crash anymore. It was tested on 3 brcm47xx devices: 1) Unknown with 0x10000 NVRAM size (0x8000 offset) 2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset) 3) Linksys WRT300N V1 with 0x10000 (0x8000 offset) And 3 bcm53xx devices: 1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size 2) Buffalo WZR-1750DHP with 0x10000 NVRAM size 3) Netgear R6250 V1 with 0x180000 NVRAM size (all using 0 offset) This is an important change as it allows reading whole NVRAM. This may critical when reading some basic configuration (e.g. switch ports). Signed-off-by: -
rmilecki authored
Some MTD partitions with NVRAM have content starting in the middle. In such case offset is set and nvram_header returns pointer to the middle. It means we have to respect offset when calculating remaining space. By the way use real MTD partition size (nvram_part_size variable) as we may want to bump NVRAM_SPACE in the (very near) future. Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
- Jul 07, 2015
-
-
nbd authored
r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range extender") introduced a pdata based modification of the tx_clk_dly. But it was not checked if pdata actually existed. This caused a page fault on all devices which didn't have at803x_platform_data specified for an at803x based device. Signed-off-by:Sven Eckelmann <sven@open-mesh.com> Backport of r46200 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46252 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
lookup_target was trampling the $feed variable, resulting in the -p flag no longer preferentially installing from the named feed. Make sure to use a local variable for this instead. Signed-off-by:
Karl Palsson <karlp@remake.is> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46213 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 04, 2015
-
-
jogo authored
sd_mod depends on scsi_mod, but due to it being an AutoLoad and not AutoProbe module, it was not loading when installing the package, causing unknown symbol errors for sd_mod and anything depending on it. Closes #14927, #18293, #19351. Backport of r46176. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46177 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 03, 2015
-
-
jow authored
The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which will not work outside of the original build environment. Replace the hardcoded staging_dir occurences with paths relative to the $STAGING_DIR environment variable to make the g++-uc* wrappers usable in an SDK environment. Fixes the libdb47 build failure reported at https://lists.openwrt.org/pipermail/openwrt-devel/2015-April/032455.html Signed-off-by:
-
- Jul 02, 2015
-
-
nbd authored
A long time ago, ath9k had issues during reset where the DMA engine would stay active and could potentially corrupt memory. To debug those issues, the driver would print warnings whenever they occur. Nowadays, these issues are gone and the primary cause of these messages is if the MAC is stuck during reset or busy processing a long transmission. This is fairly harmless, yet these messages continue to worry users. To reduce the number of bogus bug reports, turn these messages into debug messages and count their occurence in the "reset" debugfs file. Signed-off-by:
-
nbd authored
Signed-off-by:
-
- Jul 01, 2015
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Backport of r46150. Signed-off-by:
-
jogo authored
This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons"). Fixes #19858. Backport of r46149. Signed-off-by: -
jogo authored
Also move it to an earlier place so new boards added are less likely to confuse quilt. Fixes #19965. Backport of r46148. Signed-off-by:
-
- Jun 29, 2015
-
-
blogic authored
This reverts commit ac3184da. Signed-off-by:
-
blogic authored
This reverts commit e3326c44. Signed-off-by:
-
blogic authored
This reverts commit 27386b74. Signed-off-by:
-
- Jun 22, 2015
-
-
rmilecki authored
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by:
-
- Jun 21, 2015
-
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
rmilecki authored
Signed-off-by:
-
