Merge branch 'yellow_kernel_modules'

Makefile

@@ -91,6 +91,20 @@ red_wp77xx: legato_wp77xx
 	MANGOH_BOARD=RED \
 	mksys -t wp77xx $(MKSYS_ARGS_COMMON) $(MKSYS_ARGS_RED) mangOH.sdef
 
+.PHONY: yellow_wp85
+yellow_wp85: legato_wp85
+	TOOLCHAIN_DIR=$(shell $(LEGATO_ROOT)/bin/findtoolchain wp85 dir) \
+	TOOLCHAIN_PREFIX=$(shell $(LEGATO_ROOT)/bin/findtoolchain wp85 prefix) \
+	MANGOH_BOARD=YELLOW \
+	mksys -t wp85 $(MKSYS_ARGS_COMMON) $(MKSYS_ARGS_RED) mangOH.sdef
+
+.PHONY: yellow_wp750x
+yellow_wp750x: legato_wp750x
+	TOOLCHAIN_DIR=$(shell $(LEGATO_ROOT)/bin/findtoolchain wp750x dir) \
+	TOOLCHAIN_PREFIX=$(shell $(LEGATO_ROOT)/bin/findtoolchain wp750x prefix) \
+	MANGOH_BOARD=YELLOW \
+	mksys -t wp750x $(MKSYS_ARGS_COMMON) $(MKSYS_ARGS_RED) mangOH.sdef
+
 .PHONY: yellow_wp76xx
 yellow_wp76xx: legato_wp76xx
 	TOOLCHAIN_DIR=$(shell $(LEGATO_ROOT)/bin/findtoolchain wp76xx dir) \
@@ -98,6 +112,13 @@ yellow_wp76xx: legato_wp76xx
 	MANGOH_BOARD=YELLOW \
 	mksys -t wp76xx $(MKSYS_ARGS_COMMON) $(MKSYS_ARGS_YELLOW) mangOH.sdef
 
+.PHONY: yellow_wp77xx
+yellow_wp77xx: legato_wp77xx
+	TOOLCHAIN_DIR=$(shell $(LEGATO_ROOT)/bin/findtoolchain wp77xx dir) \
+	TOOLCHAIN_PREFIX=$(shell $(LEGATO_ROOT)/bin/findtoolchain wp77xx prefix) \
+	MANGOH_BOARD=YELLOW \
+	mksys -t wp77xx $(MKSYS_ARGS_COMMON) $(MKSYS_ARGS_YELLOW) mangOH.sdef
+
 .PHONY: clean
 clean:
 	rm -rf build

linux_kernel_modules/bq25601/Kconfig

+menuconfig POWER_SUPPLY
+	bool "Power supply class support"
+	help
+	  Say Y here to enable power supply class support. This allows
+	  power supply (batteries, AC, USB) monitoring by userspace
+	  via sysfs and uevent (if available) and/or APM kernel interface
+	  (if selected below).
+
+if POWER_SUPPLY
+
+
+config CHARGER_BQ25601
+	tristate "TI BQ25601 battery charger driver"
+	depends on I2C && GPIOLIB
+	help
+	  Say Y to enable support for the TI BQ25601 battery charger.
+
+
+endif # POWER_SUPPLY
+

linux_kernel_modules/bq25601/README

+Driver files were copied from https://github.com/tibms/kernel-3.18/tree/pmic  in revision 8094dd062881463a0866fe93cc890c8b946e1d21

linux_kernel_modules/bq25601/bq25601.mdef

+sources:
+{
+    bq2560x_charger.c
+}

linux_kernel_modules/bq25601/bq2560x.h

+/*
+ * BQ2560x battery charging driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _LINUX_BQ2560X_I2C_H
+#define _LINUX_BQ2560X_I2C_H
+
+#include <linux/power_supply.h>
+
+
+struct bq2560x_charge_param {
+	int vlim;
+	int ilim;
+	int ichg;
+	int vreg;
+};
+
+enum stat_ctrl {
+	STAT_CTRL_STAT,
+	STAT_CTRL_ICHG,
+	STAT_CTRL_INDPM,
+	STAT_CTRL_DISABLE,
+};
+
+enum vboost {
+	BOOSTV_4850 = 4850,
+	BOOSTV_5000 = 5000,
+	BOOSTV_5150 = 5150,
+	BOOSTV_5300	= 5300,
+};
+
+enum iboost {
+	BOOSTI_500 = 500,
+	BOOSTI_1200 = 1200,
+};
+
+enum vac_ovp {
+	VAC_OVP_5500 = 5500,
+	VAC_OVP_6200 = 6200,
+	VAC_OVP_10500 = 10500,
+	VAC_OVP_14300 = 14300,
+};
+
+
+struct bq2560x_platform_data {
+	struct bq2560x_charge_param usb;
+	struct bq2560x_charge_param ta;
+	int iprechg;
+	int iterm;
+	
+	enum stat_ctrl statctrl;
+	enum vboost boostv;	// options are 4850,
+	enum iboost boosti; // options are 500mA, 1200mA
+	enum vac_ovp vac_ovp;
+	
+};
+
+#endif
\ No newline at end of file

linux_kernel_modules/bq25601/bq2560x_charger.c

+/*
+ * BQ2560x battery charging driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#define pr_fmt(fmt)	"bq2560x: %s: " fmt, __func__
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/err.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
+#include <linux/debugfs.h>
+#include <linux/bitops.h>
+#include <linux/math64.h>
+#include <linux/alarmtimer.h>
+
+#include "bq2560x_reg.h"
+#include "bq2560x.h"
+
+#if 1
+#undef pr_debug
+#define pr_debug pr_err
+#undef pr_info
+#define pr_info pr_err
+#undef dev_dbg
+#define dev_dbg dev_err
+#else
+#undef pr_info
+#define pr_info pr_debug
+#endif
+
+enum bq2560x_vbus_type {
+	BQ2560X_VBUS_NONE = REG08_VBUS_TYPE_NONE,
+	BQ2560X_VBUS_USB = REG08_VBUS_TYPE_USB,
+	BQ2560X_VBUS_ADAPTER = REG08_VBUS_TYPE_ADAPTER,
+	BQ2560X_VBUS_OTG = REG08_VBUS_TYPE_OTG,
+};
+
+enum bq2560x_part_no {
+	BQ25600 = 0x00,
+	BQ25601 = 0x02,
+};
+
+enum {
+	USER		= BIT(0),
+	JEITA		= BIT(1),
+	BATT_FC		= BIT(2),
+	BATT_PRES	= BIT(3),
+};
+
+enum wakeup_src {
+	WAKEUP_SRC_MONITOR = 0,
+	WAKEUP_SRC_JEITA,
+	WAKEUP_SRC_MAX,
+};
+
+#define WAKEUP_SRC_MASK (~(~0 << WAKEUP_SRC_MAX))
+struct bq2560x_wakeup_source {
+	struct wakeup_source source;
+	unsigned long enabled_bitmap;
+	spinlock_t ws_lock;
+};
+
+enum bq2560x_charge_state {
+	CHARGE_STATE_IDLE = REG08_CHRG_STAT_IDLE,
+	CHARGE_STATE_PRECHG = REG08_CHRG_STAT_PRECHG,
+	CHARGE_STATE_FASTCHG = REG08_CHRG_STAT_FASTCHG,
+	CHARGE_STATE_CHGDONE = REG08_CHRG_STAT_CHGDONE,
+};
+
+struct bq2560x_otg_regulator {
+	struct regulator_desc	rdesc;
+	struct regulator_dev	*rdev;
+};
+
+
+struct bq2560x {
+	struct device *dev;
+	struct i2c_client *client;
+
+	enum bq2560x_part_no part_no;
+	int revision;
+
+	int gpio_ce;
+
+	int vbus_type;
+	
+	int status;
+	
+	struct mutex data_lock;
+	struct mutex i2c_rw_lock;
+	struct mutex profile_change_lock;
+	struct mutex charging_disable_lock;
+	struct mutex irq_complete;
+
+	struct bq2560x_wakeup_source bq2560x_ws;
+
+	bool irq_waiting;
+	bool irq_disabled;
+	bool resume_completed;
+
+	bool batt_present;
+	bool usb_present;
+
+	bool batt_full;
+
+	bool charge_enabled;/* Register bit status */
+	bool otg_enabled;
+	bool batfet_enabled;
+	bool in_hiz;
+	bool dis_safety;
+
+	bool vindpm_triggered;
+	bool iindpm_triggered;
+
+	bool in_therm_regulation;
+	bool in_vsys_regulation;
+
+	bool power_good;
+	bool vbus_good;
+	
+	bool topoff_active;
+	bool acov_triggered;
+
+	/* if use software jeita in case of NTC is connected to gauge */
+	bool software_jeita_supported;
+	bool jeita_active;
+
+	bool batt_hot;
+	bool batt_cold;
+	bool batt_warm;
+	bool batt_cool;
+
+	int batt_hot_degc;
+	int batt_warm_degc;
+	int batt_cool_degc;
+	int batt_cold_degc;
+	int hot_temp_hysteresis;
+	int cold_temp_hysteresis;
+
+	int batt_cool_ma;
+	int batt_warm_ma;
+	int batt_cool_mv;
+	int batt_warm_mv;
+
+
+	int batt_temp;
+
+	int jeita_ma;
+	int jeita_mv;
+
+	unsigned int thermal_levels;
+	unsigned int therm_lvl_sel;
+	unsigned int *thermal_mitigation;
+
+	int usb_psy_ma;
+	int charge_state;
+	int charging_disabled_status;
+
+	int fault_status;
+
+	int skip_writes;
+	int skip_reads;
+
+	struct bq2560x_platform_data* platform_data;
+
+	struct delayed_work discharge_jeita_work; /*normal no charge mode*/
+	struct delayed_work charge_jeita_work; /*charge mode jeita work*/
+
+	struct alarm jeita_alarm;
+
+	struct dentry *debug_root;
+
+	struct bq2560x_otg_regulator otg_vreg;
+
+	struct power_supply *usb_psy;
+	struct power_supply *bms_psy;
+	struct power_supply batt_psy;
+};
+
+static int BatteryTestStatus_enable = 0;
+
+static int __bq2560x_read_reg(struct bq2560x* bq, u8 reg, u8 *data)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(bq->client, reg);
+	if (ret < 0) {
+		pr_err("i2c read fail: can't read from reg 0x%02X\n", reg);
+		return ret;
+	}
+
+	*data = (u8)ret;
+	
+	return 0;
+}
+
+static int __bq2560x_write_reg(struct bq2560x* bq, int reg, u8 val)
+{
+	s32 ret;
+
+	ret = i2c_smbus_write_byte_data(bq->client, reg, val);
+	if (ret < 0) {
+		pr_err("i2c write fail: can't write 0x%02X to reg 0x%02X: %d\n",
+				val, reg, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int bq2560x_read_byte(struct bq2560x *bq, u8 *data, u8 reg)
+{
+	int ret;
+
+	if (bq->skip_reads) {
+		*data = 0;
+		return 0;
+	}
+
+	mutex_lock(&bq->i2c_rw_lock);
+	ret = __bq2560x_read_reg(bq, reg, data);
+	mutex_unlock(&bq->i2c_rw_lock);
+
+	return ret;
+}
+
+
+static int bq2560x_write_byte(struct bq2560x *bq, u8 reg, u8 data)
+{
+	int ret;
+
+	if (bq->skip_writes) {
+		return 0;
+	}
+
+	mutex_lock(&bq->i2c_rw_lock);
+	ret = __bq2560x_write_reg(bq, reg, data);
+	mutex_unlock(&bq->i2c_rw_lock);
+
+	if (ret) {
+		pr_err("Failed: reg=%02X, ret=%d\n", reg, ret);
+	}
+
+	return ret;
+}
+
+
+static int bq2560x_update_bits(struct bq2560x *bq, u8 reg, 
+				u8 mask, u8 data)
+{
+	int ret;
+	u8 tmp;
+
+
+	if (bq->skip_reads || bq->skip_writes)
+		return 0;
+
+	mutex_lock(&bq->i2c_rw_lock);
+	ret = __bq2560x_read_reg(bq, reg, &tmp);
+	if (ret) {
+		pr_err("Failed: reg=%02X, ret=%d\n", reg, ret);
+		goto out;
+	}
+
+	tmp &= ~mask;
+	tmp |= data & mask;
+
+	ret = __bq2560x_write_reg(bq, reg, tmp);
+	if (ret) {
+		pr_err("Failed: reg=%02X, ret=%d\n", reg, ret);
+	}
+
+out:
+	mutex_unlock(&bq->i2c_rw_lock);
+	return ret;
+}
+static void bq2560x_stay_awake(struct bq2560x_wakeup_source *source,
+	enum wakeup_src wk_src)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&source->ws_lock, flags);
+
+	if (!__test_and_set_bit(wk_src, &source->enabled_bitmap)) {
+		__pm_stay_awake(&source->source);
+		pr_debug("enabled source %s, wakeup_src %d\n",
+			source->source.name, wk_src);
+	}
+	spin_unlock_irqrestore(&source->ws_lock, flags);
+}
+
+static void bq2560x_relax(struct bq2560x_wakeup_source *source,
+	enum wakeup_src wk_src)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&source->ws_lock, flags);
+	if (__test_and_clear_bit(wk_src, &source->enabled_bitmap) &&
+		!(source->enabled_bitmap & WAKEUP_SRC_MASK)) {
+		__pm_relax(&source->source);
+		pr_debug("disabled source %s\n", source->source.name);
+	}
+	spin_unlock_irqrestore(&source->ws_lock, flags);
+
+	pr_debug("relax source %s, wakeup_src %d\n",
+		source->source.name, wk_src);
+}
+
+static void bq2560x_wakeup_src_init(struct bq2560x *bq)
+{
+	spin_lock_init(&bq->bq2560x_ws.ws_lock);
+	wakeup_source_init(&bq->bq2560x_ws.source, "bq2560x");
+}
+
+
+
+static int bq2560x_enable_otg(struct bq2560x *bq)
+{
+	u8 val = REG01_OTG_ENABLE << REG01_OTG_CONFIG_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_01,
+				REG01_OTG_CONFIG_MASK, val);
+
+}
+
+static int bq2560x_disable_otg(struct bq2560x *bq)
+{
+	u8 val = REG01_OTG_DISABLE << REG01_OTG_CONFIG_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_01,
+				   REG01_OTG_CONFIG_MASK, val);
+
+}
+
+static int bq2560x_enable_charger(struct bq2560x *bq)
+{
+	int ret;
+	u8 val = REG01_CHG_ENABLE << REG01_CHG_CONFIG_SHIFT;
+
+	ret = bq2560x_update_bits(bq, BQ2560X_REG_01, REG01_CHG_CONFIG_MASK, val);
+
+	return ret;
+}
+
+static int bq2560x_disable_charger(struct bq2560x *bq)
+{
+	int ret;
+	u8 val = REG01_CHG_DISABLE << REG01_CHG_CONFIG_SHIFT;
+
+	ret = bq2560x_update_bits(bq, BQ2560X_REG_01, REG01_CHG_CONFIG_MASK, val);
+	return ret;
+}
+
+int bq2560x_set_chargecurrent(struct bq2560x *bq, int curr)
+{
+	u8 ichg;
+
+	if (curr < REG02_ICHG_BASE)
+		curr = REG02_ICHG_BASE;
+
+	ichg = (curr - REG02_ICHG_BASE)/REG02_ICHG_LSB;
+	return bq2560x_update_bits(bq, BQ2560X_REG_02, REG02_ICHG_MASK, 
+				ichg << REG02_ICHG_SHIFT);
+
+}
+
+int bq2560x_set_term_current(struct bq2560x *bq, int curr)
+{
+	u8 iterm;
+
+	if (curr < REG03_ITERM_BASE)
+		curr = REG03_ITERM_BASE;
+
+	iterm = (curr - REG03_ITERM_BASE) / REG03_ITERM_LSB;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_03, REG03_ITERM_MASK, 
+				iterm << REG03_ITERM_SHIFT);
+}
+
+
+int bq2560x_set_prechg_current(struct bq2560x *bq, int curr)
+{
+	u8 iprechg;
+
+	if (curr < REG03_IPRECHG_BASE)
+		curr = REG03_IPRECHG_BASE;
+
+	iprechg = (curr - REG03_IPRECHG_BASE) / REG03_IPRECHG_LSB;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_03, REG03_IPRECHG_MASK, 
+				iprechg << REG03_IPRECHG_SHIFT);
+}
+
+int bq2560x_set_chargevolt(struct bq2560x *bq, int volt)
+{
+	u8 val;
+	
+	if (volt < REG04_VREG_BASE)
+		volt = REG04_VREG_BASE;
+
+	val = (volt - REG04_VREG_BASE)/REG04_VREG_LSB;
+	return bq2560x_update_bits(bq, BQ2560X_REG_04, REG04_VREG_MASK, 
+				val << REG04_VREG_SHIFT);
+}
+
+
+int bq2560x_set_input_volt_limit(struct bq2560x *bq, int volt)
+{
+	u8 val;
+
+	if (volt < REG06_VINDPM_BASE)
+		volt = REG06_VINDPM_BASE;
+
+	val = (volt - REG06_VINDPM_BASE) / REG06_VINDPM_LSB;
+	return bq2560x_update_bits(bq, BQ2560X_REG_06, REG06_VINDPM_MASK, 
+				val << REG06_VINDPM_SHIFT);
+}
+
+int bq2560x_set_input_current_limit(struct bq2560x *bq, int curr)
+{
+	u8 val;
+
+	if (curr < REG00_IINLIM_BASE)
+		curr = REG00_IINLIM_BASE;
+
+	val = (curr - REG00_IINLIM_BASE) / REG00_IINLIM_LSB;
+	return bq2560x_update_bits(bq, BQ2560X_REG_00, REG00_IINLIM_MASK, 
+				val << REG00_IINLIM_SHIFT);
+}
+
+
+int bq2560x_set_watchdog_timer(struct bq2560x *bq, u8 timeout)
+{
+	u8 temp;
+
+	temp = (u8)(((timeout - REG05_WDT_BASE) / REG05_WDT_LSB) << REG05_WDT_SHIFT);
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_05, REG05_WDT_MASK, temp); 
+}
+EXPORT_SYMBOL_GPL(bq2560x_set_watchdog_timer);
+
+int bq2560x_disable_watchdog_timer(struct bq2560x *bq)
+{
+	u8 val = REG05_WDT_DISABLE << REG05_WDT_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_05, REG05_WDT_MASK, val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_disable_watchdog_timer);
+
+int bq2560x_reset_watchdog_timer(struct bq2560x *bq)
+{
+	u8 val = REG01_WDT_RESET << REG01_WDT_RESET_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_01, REG01_WDT_RESET_MASK, val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_reset_watchdog_timer);
+
+int bq2560x_reset_chip(struct bq2560x *bq)
+{
+	int ret;
+	u8 val = REG0B_REG_RESET << REG0B_REG_RESET_SHIFT;
+
+	ret = bq2560x_update_bits(bq, BQ2560X_REG_0B, REG0B_REG_RESET_MASK, val);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bq2560x_reset_chip);
+
+int bq2560x_enter_hiz_mode(struct bq2560x *bq)
+{
+	u8 val = REG00_HIZ_ENABLE << REG00_ENHIZ_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_00, REG00_ENHIZ_MASK, val);
+
+}
+EXPORT_SYMBOL_GPL(bq2560x_enter_hiz_mode);
+
+int bq2560x_exit_hiz_mode(struct bq2560x *bq)
+{
+
+	u8 val = REG00_HIZ_DISABLE << REG00_ENHIZ_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_00, REG00_ENHIZ_MASK, val);
+
+}
+EXPORT_SYMBOL_GPL(bq2560x_exit_hiz_mode);
+
+int bq2560x_get_hiz_mode(struct bq2560x *bq, u8 *state)
+{
+	u8 val;
+	int ret;
+
+	ret = bq2560x_read_byte(bq, &val, BQ2560X_REG_00);
+	if (ret)
+		return ret;
+	*state = (val & REG00_ENHIZ_MASK) >> REG00_ENHIZ_SHIFT;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bq2560x_get_hiz_mode);
+
+
+static int bq2560x_enable_term(struct bq2560x* bq, bool enable)
+{
+	u8 val;
+	int ret;
+
+	if (enable)
+		val = REG05_TERM_ENABLE << REG05_EN_TERM_SHIFT;
+	else
+		val = REG05_TERM_DISABLE << REG05_EN_TERM_SHIFT;
+
+	ret = bq2560x_update_bits(bq, BQ2560X_REG_05, REG05_EN_TERM_MASK, val);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bq2560x_enable_term);
+
+int bq2560x_set_boost_current(struct bq2560x *bq, int curr)
+{
+	u8 val;
+
+	val = REG02_BOOST_LIM_0P5A;
+	if (curr == BOOSTI_1200)
+		val = REG02_BOOST_LIM_1P2A;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_02, REG02_BOOST_LIM_MASK, 
+				val << REG02_BOOST_LIM_SHIFT);
+}
+
+int bq2560x_set_boost_voltage(struct bq2560x *bq, int volt)
+{
+	u8 val;
+
+	if (volt == BOOSTV_4850)
+		val = REG06_BOOSTV_4P85V;
+	else if (volt == BOOSTV_5150)
+		val = REG06_BOOSTV_5P15V;
+	else if (volt == BOOSTV_5300)
+		val = REG06_BOOSTV_5P3V;
+	else
+		val = REG06_BOOSTV_5V;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_06, REG06_BOOSTV_MASK, 
+				val << REG06_BOOSTV_SHIFT);
+}
+
+static int bq2560x_set_acovp_threshold(struct bq2560x *bq, int volt)
+{
+	u8 val;
+
+	if (volt == VAC_OVP_14300)
+		val = REG06_OVP_14P3V;
+	else if (volt == VAC_OVP_10500)
+		val = REG06_OVP_10P5V;
+	else if (volt == VAC_OVP_6200)
+		val = REG06_OVP_6P2V;
+	else
+		val = REG06_OVP_5P5V;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_06, REG06_OVP_MASK, 
+				val << REG06_OVP_SHIFT);
+}
+
+
+static int bq2560x_set_stat_ctrl(struct bq2560x *bq, int ctrl)
+{
+	u8 val;
+
+	val = ctrl;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_00, REG00_STAT_CTRL_MASK, 
+				val << REG00_STAT_CTRL_SHIFT);
+}
+
+
+static int bq2560x_set_int_mask(struct bq2560x *bq, int mask)
+{
+	u8 val;
+
+	val = mask;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_0A, REG0A_INT_MASK_MASK,
+				val << REG0A_INT_MASK_SHIFT);
+}
+
+
+static int bq2560x_enable_batfet(struct bq2560x *bq)
+{
+	const u8 val = REG07_BATFET_ON << REG07_BATFET_DIS_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_07, REG07_BATFET_DIS_MASK,
+				val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_enable_batfet);
+
+
+static int bq2560x_disable_batfet(struct bq2560x *bq)
+{
+	const u8 val = REG07_BATFET_OFF << REG07_BATFET_DIS_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_07, REG07_BATFET_DIS_MASK,
+				val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_disable_batfet);
+
+static int bq2560x_set_batfet_delay(struct bq2560x *bq, uint8_t delay)
+{
+	u8 val;
+
+	if (delay == 0)
+		val = REG07_BATFET_DLY_0S;
+	else
+		val = REG07_BATFET_DLY_10S;
+	
+	val <<= REG07_BATFET_DLY_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_07, REG07_BATFET_DLY_MASK,
+								val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_set_batfet_delay);
+
+static int bq2560x_set_vdpm_bat_track(struct bq2560x *bq)
+{
+	const u8 val = REG07_VDPM_BAT_TRACK_200MV << REG07_VDPM_BAT_TRACK_SHIFT;
+
+	return bq2560x_update_bits(bq, BQ2560X_REG_07, REG07_VDPM_BAT_TRACK_MASK,
+				val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_set_vdpm_bat_track);
+
+static int bq2560x_enable_safety_timer(struct bq2560x *bq)
+{
+	const u8 val = REG05_CHG_TIMER_ENABLE << REG05_EN_TIMER_SHIFT;
+	
+	return bq2560x_update_bits(bq, BQ2560X_REG_05, REG05_EN_TIMER_MASK,
+				val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_enable_safety_timer);
+
+
+static int bq2560x_disable_safety_timer(struct bq2560x *bq)
+{
+	const u8 val = REG05_CHG_TIMER_DISABLE << REG05_EN_TIMER_SHIFT;
+	
+	return bq2560x_update_bits(bq, BQ2560X_REG_05, REG05_EN_TIMER_MASK,
+				val);
+}
+EXPORT_SYMBOL_GPL(bq2560x_disable_safety_timer);
+
+static int bq2560x_charging_disable(struct bq2560x *bq, int reason, 
+					int disable)
+{
+
+	int ret = 0;
+	int disabled;
+
+	mutex_lock(&bq->charging_disable_lock);
+
+	disabled = bq->charging_disabled_status;
+
+	pr_err("reason=%d requested_disable=%d disabled_status=%d\n",
+					reason, disable, disabled);
+
+	if (disable == true)
+		disabled |= reason;
+	else
+		disabled &= ~reason;
+
+	if (disabled && bq->charge_enabled)
+		ret = bq2560x_disable_charger(bq);
+	else if (!disabled && !bq->charge_enabled)
+		ret = bq2560x_enable_charger(bq);
+
+	if (ret) {
+		pr_err("Couldn't disable/enable charging for reason=%d ret=%d\n",
+							ret, reason);
+	} else {
+		bq->charging_disabled_status = disabled;
+		mutex_lock(&bq->data_lock);
+		bq->charge_enabled = !disabled;
+		mutex_unlock(&bq->data_lock);
+	}
+	mutex_unlock(&bq->charging_disable_lock);
+
+	return ret;
+}
+
+
+static struct power_supply *get_bms_psy(struct bq2560x *bq)
+{
+	if (bq->bms_psy)
+		return bq->bms_psy;
+	bq->bms_psy = power_supply_get_by_name("bms");
+	if (!bq->bms_psy)
+		pr_debug("bms power supply not found\n");
+	
+	return bq->bms_psy;
+}
+
+static int bq2560x_get_batt_property(struct bq2560x *bq,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct power_supply *bms_psy = get_bms_psy(bq);
+
+	int ret;
+	
+	if (!bms_psy)
+		return -EINVAL;
+	
+	ret = bms_psy->get_property(bms_psy, psp, val);
+
+	return ret;
+}
+
+static inline bool is_device_suspended(struct bq2560x *bq);
+static int bq2560x_get_prop_charge_type(struct bq2560x *bq)
+{
+	u8 val = 0;
+	if (is_device_suspended(bq))
+		return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+
+	bq2560x_read_byte(bq, &val, BQ2560X_REG_08);
+	val &= REG08_CHRG_STAT_MASK;
+	val >>= REG08_CHRG_STAT_SHIFT;
+	switch (val) {
+	case CHARGE_STATE_FASTCHG:
+		return POWER_SUPPLY_CHARGE_TYPE_FAST;
+	case CHARGE_STATE_PRECHG:
+		return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+	case CHARGE_STATE_CHGDONE:
+	case CHARGE_STATE_IDLE:
+		return POWER_SUPPLY_CHARGE_TYPE_NONE;
+	default:
+		return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+	}
+}
+
+static int bq2560x_get_prop_batt_present(struct bq2560x *bq)
+{
+	union power_supply_propval batt_prop = {0,};
+	int ret;
+
+	ret = bq2560x_get_batt_property(bq,
+			POWER_SUPPLY_PROP_PRESENT, &batt_prop);
+	if (!ret){
+		mutex_lock(&bq->data_lock);
+		bq->batt_present = batt_prop.intval;
+		mutex_unlock(&bq->data_lock);
+	}
+	return ret;
+
+}
+
+static int bq2560x_get_prop_batt_full(struct bq2560x *bq)
+{
+	union power_supply_propval batt_prop = {0,};
+	int ret;
+
+	ret = bq2560x_get_batt_property(bq, 
+			POWER_SUPPLY_PROP_STATUS, &batt_prop);
+	if (!ret) {
+		mutex_lock(&bq->data_lock);
+		bq->batt_full = (batt_prop.intval == POWER_SUPPLY_STATUS_FULL);
+		mutex_unlock(&bq->data_lock);
+	}
+	return ret;
+}
+
+static int bq2560x_get_prop_charge_status(struct bq2560x *bq)
+{
+	union power_supply_propval batt_prop = {0,};
+	int ret;
+	u8 status;
+
+	ret = bq2560x_get_batt_property(bq, 
+			POWER_SUPPLY_PROP_STATUS, &batt_prop);
+	if (!ret && batt_prop.intval == POWER_SUPPLY_STATUS_FULL)
+		return POWER_SUPPLY_STATUS_FULL;
+
+	ret = bq2560x_read_byte(bq, &status, BQ2560X_REG_08);
+	if (ret) {
+		return 	POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+
+	mutex_lock(&bq->data_lock);
+	bq->charge_state = (status & REG08_CHRG_STAT_MASK) >> REG08_CHRG_STAT_SHIFT;
+	mutex_unlock(&bq->data_lock);
+
+	if (bq->usb_present && bq->jeita_active 
+			&& (bq->batt_warm || bq->batt_cool) 
+			&& bq->charge_state == CHARGE_STATE_CHGDONE)
+		return POWER_SUPPLY_STATUS_FULL;
+
+	switch(bq->charge_state) {
+		case CHARGE_STATE_FASTCHG:
+		case CHARGE_STATE_PRECHG:
+			return POWER_SUPPLY_STATUS_CHARGING;
+		case CHARGE_STATE_CHGDONE:
+			return POWER_SUPPLY_STATUS_NOT_CHARGING;
+		case CHARGE_STATE_IDLE:
+			return POWER_SUPPLY_STATUS_DISCHARGING;
+		default:
+			return 	POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+
+}
+
+static int bq2560x_get_prop_health(struct bq2560x *bq)
+{
+	int ret;
+	union power_supply_propval batt_prop = {0,};
+
+	if (bq->software_jeita_supported) {
+		if (bq->jeita_active) {
+			if (bq->batt_hot) 
+				ret = POWER_SUPPLY_HEALTH_OVERHEAT;
+/*			else if (bq->batt_warm)
+				ret = POWER_SUPPLY_HEALTH_WARM;
+			else if (bq->batt_cool)
+				ret = POWER_SUPPLY_HEALTH_COOL;
+			else if (bq->batt_cold)
+				ret = POWER_SUPPLY_HEALTH_COLD;*/
+		} else {
+			ret = POWER_SUPPLY_HEALTH_GOOD;
+		}
+	} else {/* get health status from gauge */
+		ret = bq2560x_get_batt_property(bq, 
+					POWER_SUPPLY_PROP_HEALTH, &batt_prop);
+		if (!ret)
+			ret = batt_prop.intval;
+		else
+			ret = POWER_SUPPLY_HEALTH_UNKNOWN;
+	}
+	return ret;
+}
+
+
+static enum power_supply_property bq2560x_charger_props[] = {
+
+	POWER_SUPPLY_PROP_CHARGE_TYPE, 
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CHARGING_ENABLED,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+
+	//POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	//POWER_SUPPLY_PROP_RESISTANCE_ID,
+};
+
+void static runin_work(struct bq2560x *bq, int batt_capacity)
+{
+	int rc;
+
+	printk("%s:BatteryTestStatus_enable = %d bq->usb_present = %d \n",
+			__func__,BatteryTestStatus_enable,bq->usb_present);
+
+	if (/*!bq->usb_present || */!BatteryTestStatus_enable) {
+		if (bq->in_hiz) {
+			rc = bq2560x_exit_hiz_mode(bq);
+			if (rc) {
+				dev_err(bq->dev, "Couldn't enable charge rc=%d\n", rc);
+			} else {
+				pr_err("Exit Hiz Successfully\n");
+				bq->in_hiz = false;
+			}
+		}
+		return;
+	}
+
+	if (batt_capacity >= 80) {
+		pr_debug("bq2560x_get_prop_batt_capacity > 80\n");
+		//rc = bq2560x_charging_disable(bq, USER, true);
+		if (!bq->in_hiz) {
+			rc = bq2560x_enter_hiz_mode(bq);
+			if (rc) {
+				dev_err(bq->dev, "Couldn't disenable charge rc=%d\n", rc);
+			} else {
+				pr_err("Enter Hiz Successfully\n");
+				bq->in_hiz = true;
+			}
+		}
+	} else if (batt_capacity < 60) {
+		pr_debug("bq2560x_get_prop_batt_capacity < 60\n");
+		//rc = bq2560x_charging_disable(bq, USER, false);
+		if (bq->in_hiz) {
+			rc = bq2560x_exit_hiz_mode(bq);
+			if (rc) {
+				dev_err(bq->dev, "Couldn't enable charge rc=%d\n", rc);
+			} else {
+				pr_err("Exit Hiz Successfully\n");
+				bq->in_hiz = false;
+			}
+		} 
+	}
+}
+static int bq2560x_charger_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+
+	struct bq2560x *bq = container_of(psy, struct bq2560x, batt_psy);
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = bq2560x_get_prop_charge_type(bq);
+		pr_debug("POWER_SUPPLY_PROP_CHARGE_TYPE:%d\n", val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGING_ENABLED:
+		val->intval = bq->charge_enabled;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = 3080;
+		break;
+	
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bq2560x_get_prop_charge_status(bq);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = bq2560x_get_prop_health(bq);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		bq2560x_get_batt_property(bq, psp, val);
+		runin_work(bq, val->intval);
+		break;
+	//case POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL:
+	//	val->intval = bq->therm_lvl_sel;
+	//	break;
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+	case POWER_SUPPLY_PROP_TEMP:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+	//case POWER_SUPPLY_PROP_RESISTANCE_ID:
+	//	return bq2560x_get_batt_property(bq, psp, val);
+	default:
+		return -EINVAL;
+
+	}
+
+	return 0;
+}
+
+//static int bq2560x_system_temp_level_set(struct bq2560x *bq, int);
+
+static int bq2560x_charger_set_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       const union power_supply_propval *val)
+{
+	struct bq2560x *bq = container_of(psy,
+				struct bq2560x, batt_psy);
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CHARGING_ENABLED:
+		bq2560x_charging_disable(bq, USER, !val->intval);
+
+		power_supply_changed(&bq->batt_psy);
+		power_supply_changed(bq->usb_psy);
+		pr_info("POWER_SUPPLY_PROP_CHARGING_ENABLED: %s\n", 
+				val->intval ? "enable" : "disable");
+		break;
+	//case POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL:
+	//	bq2560x_system_temp_level_set(bq, val->intval);
+	//	break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bq2560x_charger_is_writeable(struct power_supply *psy,
+				       enum power_supply_property prop)
+{
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CHARGING_ENABLED:
+	//case POWER_SUPPLY_PROP_SYSTEM_TEMP_LEVEL:
+	//	ret = 1;
+	//	break;
+	default:
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+static int bq2560x_update_charging_profile(struct bq2560x *bq)
+{
+	int ret;
+	int chg_ma;
+	int chg_mv;
+	int icl;
+	int therm_ma;
+
+	union power_supply_propval prop = {0,};
+
+
+	if (!bq->usb_present) 
+		return 0;
+
+	ret = bq->usb_psy->get_property(bq->usb_psy, 
+				POWER_SUPPLY_PROP_TYPE, &prop);
+	
+	if (ret < 0) {
+		pr_err("couldn't read USB TYPE property, ret=%d\n", ret);
+		return ret;
+	}
+	pr_err("charge type = %d\n", prop.intval);
+	mutex_lock(&bq->profile_change_lock);
+	if (bq->jeita_active) {
+		chg_ma = bq->jeita_ma;
+		chg_mv = bq->jeita_mv;
+	} else {
+		if (prop.intval == POWER_SUPPLY_TYPE_USB_DCP
+			|| prop.intval == POWER_SUPPLY_TYPE_USB_CDP) {
+			chg_ma = bq->platform_data->ta.ichg;
+			chg_mv = bq->platform_data->ta.vreg;
+		} else {
+			chg_ma = bq->platform_data->usb.ichg;
+			chg_mv = bq->platform_data->usb.vreg;
+		}
+	}
+	
+	icl = bq->usb_psy_ma;
+	if (bq->usb_psy_ma < chg_ma) {
+		chg_ma = bq->usb_psy_ma;
+	}
+
+	if (bq->therm_lvl_sel > 0
+			&& bq->therm_lvl_sel < (bq->thermal_levels - 1))
+		/*
+		 * consider thermal limit only when it is active and not at
+		 * the highest level
+		 */
+		therm_ma = bq->thermal_mitigation[bq->therm_lvl_sel];
+	else
+		therm_ma = chg_ma;
+
+	chg_ma = min(therm_ma, chg_ma);
+
+	pr_err("charge volt = %d, charge curr = %d, input curr limit = %d\n",
+				chg_mv, chg_ma, icl);
+
+	ret = bq2560x_set_input_current_limit(bq, icl);
+	if (ret < 0)
+		pr_err("couldn't set input current limit, ret=%d\n", ret);
+
+	ret = bq2560x_set_input_volt_limit(bq, bq->platform_data->ta.vlim);
+	if (ret < 0)
+		pr_err("couldn't set input voltage limit, ret=%d\n", ret);
+
+	ret = bq2560x_set_chargevolt(bq, chg_mv);
+	if (ret < 0)
+		pr_err("couldn't set charge voltage ret=%d\n", ret);
+
+	ret = bq2560x_set_chargecurrent(bq, chg_ma);
+	if (ret < 0)
+		pr_err("couldn't set charge current, ret=%d\n", ret);
+	
+	mutex_unlock(&bq->profile_change_lock);
+
+	return 0;
+}
+
+
+/*static int bq2560x_system_temp_level_set(struct bq2560x *bq,
+							int lvl_sel)
+{
+	int ret = 0;
+	int prev_therm_lvl;
+
+	pr_err("lvl_sel=%d, bq->therm_lvl_sel = %d\n", lvl_sel, bq->therm_lvl_sel);
+	if (BatteryTestStatus_enable)
+		return 0;
+
+	if (!bq->thermal_mitigation) {
+		pr_err("Thermal mitigation not supported\n");
+		return -EINVAL;
+	}
+
+	if (lvl_sel < 0) {
+		pr_err("Unsupported level selected %d\n", lvl_sel);
+		return -EINVAL;
+	}
+
+	if (lvl_sel >= bq->thermal_levels) {
+		pr_err("Unsupported level selected %d forcing %d\n", lvl_sel,
+				bq->thermal_levels - 1);
+		lvl_sel = bq->thermal_levels - 1;
+	}
+
+	if (lvl_sel == bq->therm_lvl_sel)
+		return 0;
+
+	prev_therm_lvl = bq->therm_lvl_sel;
+	bq->therm_lvl_sel = lvl_sel;
+
+	ret = bq2560x_update_charging_profile(bq);
+	if (ret)
+		pr_err("Couldn't set USB current ret = %d\n", ret);
+
+	return ret;
+}
+*/
+
+static void bq2560x_external_power_changed(struct power_supply *psy)
+{
+	struct bq2560x *bq = container_of(psy, struct bq2560x, batt_psy);
+	
+	union power_supply_propval prop = {0,};
+	int ret, current_limit = 0;
+
+	
+	ret = bq->usb_psy->get_property(bq->usb_psy, 
+				POWER_SUPPLY_PROP_CURRENT_MAX, &prop);
+	if (ret < 0)
+		pr_err("could not read USB current_max property, ret=%d\n", ret);
+	else
+		current_limit = prop.intval / 1000;
+	
+	pr_err("current_limit = %d\n", current_limit);
+	
+	if (bq->usb_psy_ma != current_limit) {
+		bq->usb_psy_ma = current_limit;
+		bq2560x_update_charging_profile(bq);
+	}
+
+	ret = bq->usb_psy->get_property(bq->usb_psy, 
+				POWER_SUPPLY_PROP_ONLINE, &prop);
+	if (ret < 0)
+		pr_err("could not read USB ONLINE property, ret=%d\n", ret);
+	else
+		pr_info("usb online status =%d\n", prop.intval);
+	
+	ret = 0;
+	bq2560x_get_prop_charge_status(bq);
+	if (bq->usb_present /*&& bq->charge_state != CHARGE_STATE_IDLE*//* && bq->charge_enabled *//*!bq->charging_disabled_status*/
+				/*&& bq->usb_psy_ma != 0*/) {
+		if (prop.intval == 0){
+			pr_err("set usb online\n");
+			ret = power_supply_set_online(bq->usb_psy, true);
+		}
+	} else {
+		if (prop.intval == 1) {
+			pr_err("set usb offline\n");
+			ret = power_supply_set_online(bq->usb_psy, false);
+		}
+	}
+
+	if (ret < 0)
+		pr_info("could not set usb online state, ret=%d\n", ret);
+
+}
+
+
+static int bq2560x_psy_register(struct bq2560x *bq)
+{
+	int ret;
+
+	bq->batt_psy.name = "battery";
+	bq->batt_psy.type = POWER_SUPPLY_TYPE_BATTERY;
+	bq->batt_psy.properties = bq2560x_charger_props;
+	bq->batt_psy.num_properties = ARRAY_SIZE(bq2560x_charger_props);
+	bq->batt_psy.get_property = bq2560x_charger_get_property;
+	bq->batt_psy.set_property = bq2560x_charger_set_property;
+	bq->batt_psy.external_power_changed = bq2560x_external_power_changed;
+	bq->batt_psy.property_is_writeable = bq2560x_charger_is_writeable;
+
+	ret = power_supply_register(bq->dev, &bq->batt_psy);
+	if (ret < 0) {
+		pr_err("failed to register batt_psy:%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void bq2560x_psy_unregister(struct bq2560x *bq)
+{
+	power_supply_unregister(&bq->batt_psy);
+}
+
+
+static int bq2560x_otg_regulator_enable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct bq2560x *bq = rdev_get_drvdata(rdev);
+
+	ret = bq2560x_enable_otg(bq);
+	if (ret) {
+		pr_err("Couldn't enable OTG mode ret=%d\n", ret);
+	} else {
+		bq->otg_enabled = true;
+		pr_info("bq2560x OTG mode Enabled!\n");
+	}
+	
+	return ret;
+}
+
+
+static int bq2560x_otg_regulator_disable(struct regulator_dev *rdev)
+{
+	int ret;
+	struct bq2560x *bq = rdev_get_drvdata(rdev);
+
+	ret = bq2560x_disable_otg(bq);
+	if (ret) {
+		pr_err("Couldn't disable OTG mode, ret=%d\n", ret);
+	} else {
+		bq->otg_enabled = false;
+		pr_info("bq2560x OTG mode Disabled\n");
+	}
+	
+	return ret;
+}
+
+
+static int bq2560x_otg_regulator_is_enable(struct regulator_dev *rdev)
+{
+	int ret;
+	u8 status;
+	u8 enabled;
+	struct bq2560x *bq = rdev_get_drvdata(rdev);
+
+	ret = bq2560x_read_byte(bq, &status, BQ2560X_REG_01);
+	if (ret)
+		return ret;
+	enabled = ((status & REG01_OTG_CONFIG_MASK) >> REG01_OTG_CONFIG_SHIFT);
+	
+	return (enabled == REG01_OTG_ENABLE) ? 1 : 0;
+	
+}
+
+
+struct regulator_ops bq2560x_otg_reg_ops = {
+	.enable		= bq2560x_otg_regulator_enable,
+	.disable	= bq2560x_otg_regulator_disable,
+	.is_enabled = bq2560x_otg_regulator_is_enable,
+};
+
+static int bq2560x_regulator_init(struct bq2560x *bq)
+{
+	int ret = 0;
+	struct regulator_init_data *init_data;
+	struct regulator_config cfg = {};
+
+	init_data = of_get_regulator_init_data(bq->dev, bq->dev->of_node);
+	if (!init_data) {
+		dev_err(bq->dev, "Unable to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	if (init_data->constraints.name) {
+		bq->otg_vreg.rdesc.owner = THIS_MODULE;
+		bq->otg_vreg.rdesc.type = REGULATOR_VOLTAGE;
+		bq->otg_vreg.rdesc.ops = &bq2560x_otg_reg_ops;
+		bq->otg_vreg.rdesc.name = init_data->constraints.name;
+		pr_info("regualtor name = %s\n", bq->otg_vreg.rdesc.name);
+
+		cfg.dev = bq->dev;
+		cfg.init_data = init_data;
+		cfg.driver_data = bq;
+		cfg.of_node = bq->dev->of_node;
+
+		init_data->constraints.valid_ops_mask
+			|= REGULATOR_CHANGE_STATUS;
+
+		bq->otg_vreg.rdev = regulator_register(
+					&bq->otg_vreg.rdesc, &cfg);
+		if (IS_ERR(bq->otg_vreg.rdev)) {
+			ret = PTR_ERR(bq->otg_vreg.rdev);
+			bq->otg_vreg.rdev = NULL;
+			if (ret != -EPROBE_DEFER)
+				dev_err(bq->dev,
+					"OTG reg failed, rc=%d\n", ret);
+		}
+	}
+
+	return ret;
+}
+
+
+static int bq2560x_parse_jeita_dt(struct device *dev, struct bq2560x* bq)
+{
+    struct device_node *np = dev->of_node;
+	int ret;
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-hot-degc",
+						&bq->batt_hot_degc);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-hot-degc\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-warm-degc",
+						&bq->batt_warm_degc);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-warm-degc\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-cool-degc",
+						&bq->batt_cool_degc);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-cool-degc\n");
+		return ret;
+	}
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-cold-degc",
+						&bq->batt_cold_degc);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-cold-degc\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-hot-hysteresis",
+						&bq->hot_temp_hysteresis);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-hot-hysteresis\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-cold-hysteresis",
+						&bq->cold_temp_hysteresis);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-cold-hysteresis\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-cool-ma",
+						&bq->batt_cool_ma);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-cool-ma\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-cool-mv",
+						&bq->batt_cool_mv);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-cool-mv\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-warm-ma",
+						&bq->batt_warm_ma);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-warm-ma\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np,"ti,bq2560x,jeita-warm-mv",
+						&bq->batt_warm_mv);
+    if(ret) {
+		pr_err("Failed to read ti,bq2560x,jeita-warm-mv\n");
+		return ret;
+	}
+
+	bq->software_jeita_supported = 
+		of_property_read_bool(np,"ti,bq2560x,software-jeita-supported");
+
+	return 0;
+}
+
+
+static struct bq2560x_platform_data* bq2560x_parse_dt(struct device *dev, 
+							struct bq2560x * bq)
+{
+    int ret;
+    struct device_node *np = dev->of_node;
+	struct bq2560x_platform_data* pdata;
+	
+	pdata = devm_kzalloc(dev, sizeof(struct bq2560x_platform_data), 
+						GFP_KERNEL);
+	if (!pdata) {
+		pr_err("Out of memory\n");
+		return NULL;
+	}
+	
+	ret = of_property_read_u32(np, "ti,bq2560x,chip-enable-gpio", &bq->gpio_ce);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,chip-enable-gpio\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,usb-vlim",&pdata->usb.vlim);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,usb-vlim\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,usb-ilim",&pdata->usb.ilim);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,usb-ilim\n");
+	}
+	
+    ret = of_property_read_u32(np,"ti,bq2560x,usb-vreg",&pdata->usb.vreg);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,usb-vreg\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,usb-ichg",&pdata->usb.ichg);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,usb-ichg\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,ta-vlim",&pdata->ta.vlim);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,ta-vlim\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,ta-ilim",&pdata->ta.ilim);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,ta-ilim\n");
+	}
+	
+    ret = of_property_read_u32(np,"ti,bq2560x,ta-vreg",&pdata->ta.vreg);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,ta-vreg\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,ta-ichg",&pdata->ta.ichg);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,ta-ichg\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,stat-pin-ctrl",&pdata->statctrl);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,stat-pin-ctrl\n");
+	}
+	
+    ret = of_property_read_u32(np,"ti,bq2560x,precharge-current",&pdata->iprechg);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,precharge-current\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,termination-current",&pdata->iterm);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,termination-current\n");
+	}
+	
+    ret = of_property_read_u32(np,"ti,bq2560x,boost-voltage",&pdata->boostv);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,boost-voltage\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,boost-current",&pdata->boosti);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,boost-current\n");
+	}
+
+    ret = of_property_read_u32(np,"ti,bq2560x,vac-ovp-threshold",&pdata->vac_ovp);
+    if(ret) {
+		pr_err("Failed to read node of ti,bq2560x,vac-ovp-threshold\n");
+	}
+
+	if (of_find_property(np, "ti,thermal-mitigation",
+					&bq->thermal_levels)) {
+		bq->thermal_mitigation = devm_kzalloc(bq->dev,
+					bq->thermal_levels,
+						GFP_KERNEL);
+
+		if (bq->thermal_mitigation == NULL) {
+			pr_err("thermal mitigation kzalloc() failed.\n");
+		}
+
+		bq->thermal_levels /= sizeof(int);
+		ret = of_property_read_u32_array(np,
+				"ti,thermal-mitigation",
+				bq->thermal_mitigation, bq->thermal_levels);
+		if (ret) {
+			pr_err("Couldn't read thermal limits ret = %d\n", ret);
+		}
+	}
+
+
+    return pdata;   
+}
+
+
+static void bq2560x_init_jeita(struct bq2560x *bq)
+{
+
+	bq->batt_temp = -EINVAL;
+
+	/* set default value in case of dts read fail */
+	bq->batt_hot_degc = 600;
+	bq->batt_warm_degc = 450;
+	bq->batt_cool_degc = 100;
+	bq->batt_cold_degc = 0;
+	
+	bq->hot_temp_hysteresis = 50;
+	bq->cold_temp_hysteresis = 50;
+
+	bq->batt_cool_ma = 400;
+	bq->batt_cool_mv = 4100;
+	bq->batt_warm_ma = 400;
+	bq->batt_warm_mv = 4100;
+
+	bq->software_jeita_supported = true;
+
+	/* DTS setting will overwrite above default value */
+
+	bq2560x_parse_jeita_dt(&bq->client->dev, bq);
+}
+
+static int bq2560x_init_device(struct bq2560x *bq)
+{
+	int ret;
+	
+	bq2560x_disable_watchdog_timer(bq);
+
+	bq2560x_enable_batfet(bq);
+	bq2560x_set_vdpm_bat_track(bq);
+	
+	ret = bq2560x_set_stat_ctrl(bq, bq->platform_data->statctrl);
+	if (ret)
+		pr_err("Failed to set stat pin control mode, ret = %d\n",ret);
+
+	ret = bq2560x_set_prechg_current(bq, bq->platform_data->iprechg);
+	if (ret)
+		pr_err("Failed to set prechg current, ret = %d\n",ret);
+	
+	ret = bq2560x_set_term_current(bq, bq->platform_data->iterm);
+	if (ret)
+		pr_err("Failed to set termination current, ret = %d\n",ret);
+	
+	ret = bq2560x_set_boost_voltage(bq, bq->platform_data->boostv);
+	if (ret)
+		pr_err("Failed to set boost voltage, ret = %d\n",ret);
+	
+	ret = bq2560x_set_boost_current(bq, bq->platform_data->boosti);
+	if (ret)
+		pr_err("Failed to set boost current, ret = %d\n",ret);
+	
+	ret = bq2560x_set_acovp_threshold(bq, bq->platform_data->vac_ovp);
+	if (ret)
+		pr_err("Failed to set acovp threshold, ret = %d\n",ret);	
+
+	ret = bq2560x_set_int_mask(bq, REG0A_IINDPM_INT_MASK | REG0A_VINDPM_INT_MASK);
+	if (ret)
+		pr_err("Failed to set vindpm and iindpm int mask\n");
+
+	ret = bq2560x_enable_charger(bq);
+	if (ret) {
+		pr_err("Failed to enable charger, ret = %d\n",ret);	
+	} else {
+		bq->charge_enabled = true;
+		pr_err("Charger Enabled Successfully!\n");
+	}
+
+	return 0;
+}
+
+
+static int bq2560x_detect_device(struct bq2560x* bq)
+{
+    int ret;
+    u8 data;
+
+    ret = bq2560x_read_byte(bq, &data, BQ2560X_REG_0B);
+    if(ret == 0){
+        bq->part_no = (data & REG0B_PN_MASK) >> REG0B_PN_SHIFT;
+        bq->revision = (data & REG0B_DEV_REV_MASK) >> REG0B_DEV_REV_SHIFT;
+    }
+
+    return ret;
+}
+
+static void bq2560x_check_jeita(struct bq2560x *bq)
+{
+
+	int ret;
+	bool last_hot, last_warm, last_cool, last_cold;
+	bool chg_disabled_jeita, jeita_hot_cold;
+	union power_supply_propval batt_prop = {0,};
+	
+	ret = bq2560x_get_batt_property(bq,
+					POWER_SUPPLY_PROP_TEMP, &batt_prop);
+	if (!ret)
+		bq->batt_temp = batt_prop.intval;
+	
+	if (bq->batt_temp == -EINVAL) 
+		return;
+
+	last_hot = bq->batt_hot;
+	last_warm = bq->batt_warm;
+	last_cool = bq->batt_cool;
+	last_cold = bq->batt_cold;
+
+	if (bq->batt_temp >= bq->batt_hot_degc) {/* HOT */
+		if (!bq->batt_hot) {
+			bq->batt_hot  = true;
+			bq->batt_warm = false;
+			bq->batt_cool = false;
+			bq->batt_cold = false;
+			bq->jeita_ma = 0;
+			bq->jeita_mv = 0;
+		}
+	} else if (bq->batt_temp >= bq->batt_warm_degc) {/* WARM */
+		if (!bq->batt_hot
+			||(bq->batt_temp < bq->batt_hot_degc - bq->hot_temp_hysteresis)){
+			bq->batt_hot  = false;
+			bq->batt_warm = true;
+			bq->batt_cool = false;
+			bq->batt_cold = false;
+			bq->jeita_mv = bq->batt_warm_mv;
+			bq->jeita_ma = bq->batt_warm_ma;
+		}
+	} else if (bq->batt_temp < bq->batt_cold_degc) {/* COLD */
+		if (!bq->batt_cold) {
+			bq->batt_hot  = false;
+			bq->batt_warm = false;
+			bq->batt_cool = false;
+			bq->batt_cold = true;
+			bq->jeita_ma = 0;
+			bq->jeita_mv = 0;
+		}
+	} else if (bq->batt_temp < bq->batt_cool_degc) {/* COOL */
+		if (!bq->batt_cold ||
+			(bq->batt_temp > bq->batt_cold_degc + bq->cold_temp_hysteresis)) {
+			bq->batt_hot  = false;
+			bq->batt_warm = false;
+			bq->batt_cool = true;
+			bq->batt_cold = false;
+			bq->jeita_mv = bq->batt_cool_mv;
+			bq->jeita_ma = bq->batt_cool_ma;
+		}
+	} else {/* NORMAL */
+		bq->batt_hot  = false;
+		bq->batt_warm = false;
+		bq->batt_cool = false;
+		bq->batt_cold = false;
+	}
+
+	bq->jeita_active = bq->batt_cool || bq->batt_hot ||
+			   bq->batt_cold || bq->batt_warm;
+	
+	if ((last_cold != bq->batt_cold) || (last_warm != bq->batt_warm) ||
+		(last_cool != bq->batt_cool) || (last_hot != bq->batt_hot)) {
+		bq2560x_update_charging_profile(bq);
+		power_supply_changed(&bq->batt_psy);
+		power_supply_changed(bq->usb_psy);
+	} else if (bq->batt_hot || bq->batt_cold) { /*continuely update event */
+		power_supply_changed(&bq->batt_psy);
+		power_supply_changed(bq->usb_psy);
+	}
+
+	jeita_hot_cold = bq->jeita_active && (bq->batt_hot || bq->batt_cold);
+	chg_disabled_jeita = !!(bq->charging_disabled_status & JEITA);
+	if (jeita_hot_cold ^ chg_disabled_jeita)
+		bq2560x_charging_disable(bq, JEITA, jeita_hot_cold);
+
+}
+
+static void bq2560x_check_batt_pres(struct bq2560x *bq)
+{
+	int ret = 0;
+	bool chg_disabled_pres;
+
+	ret = bq2560x_get_prop_batt_present(bq);
+	if (!ret) {
+		chg_disabled_pres = !!(bq->charging_disabled_status & BATT_PRES);
+		if (chg_disabled_pres ^ !bq->batt_present) {
+			ret = bq2560x_charging_disable(bq, BATT_PRES, !bq->batt_present);
+			if (ret) {
+				pr_err("failed to %s charging, ret = %d\n", 
+						bq->batt_present ? "disable" : "enable",
+						ret);
+			}
+			power_supply_changed(&bq->batt_psy);
+			power_supply_changed(bq->usb_psy);
+		}
+	}
+
+}
+
+static void bq2560x_check_batt_full(struct bq2560x *bq)
+{
+	int ret = 0;
+	bool chg_disabled_fc;
+
+	ret = bq2560x_get_prop_batt_full(bq);
+	if (!ret) {
+		chg_disabled_fc = !!(bq->charging_disabled_status & BATT_FC);
+		if (chg_disabled_fc ^ bq->batt_full) {
+			ret = bq2560x_charging_disable(bq, BATT_FC, bq->batt_full);
+			if (ret) {
+				pr_err("failed to %s charging, ret = %d\n", 
+						bq->batt_full ? "disable" : "enable",
+						ret);
+			}
+			power_supply_changed(&bq->batt_psy);
+			power_supply_changed(bq->usb_psy);
+		}
+	}
+}
+
+
+static int calculate_jeita_poll_interval(struct bq2560x* bq)
+{
+	int interval;
+
+	if (bq->batt_hot || bq->batt_cold)
+		interval = 5;
+	else if (bq->batt_warm || bq->batt_cool)
+		interval = 10;
+	else
+		interval = 15;
+	return interval;
+}
+
+#define	FG_LOG_INTERVAL		120
+static void bq2560x_dump_fg_reg(struct bq2560x *bq)
+{
+	union power_supply_propval val = {0,};
+	static int dump_cnt;
+
+	if (++dump_cnt >= (FG_LOG_INTERVAL / calculate_jeita_poll_interval(bq))) {
+		dump_cnt = 0;
+		val.intval = 0;
+//		bq->bms_psy->set_property(bq->bms_psy, 
+//				POWER_SUPPLY_PROP_UPDATE_NOW, &val); 
+	}
+}
+
+static enum alarmtimer_restart bq2560x_jeita_alarm_cb(struct alarm *alarm,
+							ktime_t now)
+{
+	struct bq2560x *bq = container_of(alarm, 
+				struct bq2560x, jeita_alarm);
+	unsigned long ns;
+
+	bq2560x_stay_awake(&bq->bq2560x_ws, WAKEUP_SRC_JEITA);
+	schedule_delayed_work(&bq->charge_jeita_work, HZ/2);
+
+	ns = calculate_jeita_poll_interval(bq) * 1000000000LL;
+	alarm_forward_now(alarm, ns_to_ktime(ns));
+	return ALARMTIMER_RESTART;
+}
+
+static void bq2560x_dump_status(struct bq2560x* bq);
+static void bq2560x_charge_jeita_workfunc(struct work_struct *work)
+{
+	struct bq2560x *bq = container_of(work, 
+				struct bq2560x, charge_jeita_work.work);
+
+	bq2560x_reset_watchdog_timer(bq);
+
+	bq2560x_check_batt_pres(bq);
+	bq2560x_check_batt_full(bq);
+	bq2560x_dump_fg_reg(bq);
+
+	bq2560x_check_jeita(bq);
+	bq2560x_dump_status(bq);
+	bq2560x_relax(&bq->bq2560x_ws, WAKEUP_SRC_JEITA);
+}
+
+
+static void bq2560x_discharge_jeita_workfunc(struct work_struct *work)
+{
+	struct bq2560x *bq = container_of(work, 
+				struct bq2560x, discharge_jeita_work.work);
+
+	bq2560x_check_batt_pres(bq);
+	bq2560x_check_batt_full(bq);
+	bq2560x_dump_fg_reg(bq);
+
+	bq2560x_check_jeita(bq);
+	schedule_delayed_work(&bq->discharge_jeita_work,
+				calculate_jeita_poll_interval(bq) * HZ);
+}
+
+static const unsigned char* charge_stat_str[] = {
+	"Not Charging",
+	"Precharging",
+	"Fast Charging",
+	"Charge Done",
+};
+
+static void bq2560x_dump_status(struct bq2560x* bq)
+{
+	u8 status;
+	u8 addr;
+	int ret;
+	u8 val;
+	union power_supply_propval batt_prop = {0,};
+	
+	ret = bq2560x_get_batt_property(bq,
+			POWER_SUPPLY_PROP_CURRENT_NOW, &batt_prop);
+
+	if (!ret)
+	 		pr_err("FG current:%d\n", batt_prop.intval);
+
+	for (addr = 0x0; addr <= 0x0B; addr++) {
+		if (addr == 0x09) {
+			pr_err("bq Reg[09] = 0x%02X\n", bq->fault_status);
+			continue;
+		}
+		ret = bq2560x_read_byte(bq, &val, addr);
+		if (!ret)
+			pr_err("bq Reg[%02X] = 0x%02X\n", addr, val);
+		else
+			pr_err("bq Reg red err\n");
+	}
+
+	ret = bq2560x_read_byte(bq, &status, BQ2560X_REG_0A);
+	if (ret) {
+		pr_err("failed to read reg0a\n");
+		return;
+	}
+
+	mutex_lock(&bq->data_lock);
+	bq->vbus_good = !!(status & REG0A_VBUS_GD_MASK);
+	bq->vindpm_triggered = !!(status & REG0A_VINDPM_STAT_MASK);
+	bq->iindpm_triggered = !!(status & REG0A_IINDPM_STAT_MASK);
+	bq->topoff_active = !!(status & REG0A_TOPOFF_ACTIVE_MASK);
+	bq->acov_triggered = !!(status & REG0A_ACOV_STAT_MASK);
+	mutex_unlock(&bq->data_lock);
+
+
+	if (!bq->power_good)
+		pr_info("Power Poor\n");
+	if (!bq->vbus_good)
+		pr_err("Vbus voltage not good!\n");
+	if (bq->vindpm_triggered)
+		pr_err("VINDPM triggered\n");
+	if (bq->iindpm_triggered)
+		pr_err("IINDPM triggered\n");
+	if (bq->acov_triggered)
+		pr_err("ACOV triggered\n");
+	
+	if (bq->fault_status & REG09_FAULT_WDT_MASK)
+		pr_err("Watchdog timer expired!\n");
+	if (bq->fault_status & REG09_FAULT_BOOST_MASK)
+		pr_err("Boost fault occurred!\n");
+	
+	status = (bq->fault_status & REG09_FAULT_CHRG_MASK) >> REG09_FAULT_CHRG_SHIFT;
+	if (status == REG09_FAULT_CHRG_INPUT)
+		pr_err("input fault!\n");
+	else if (status == REG09_FAULT_CHRG_THERMAL)
+		pr_err("charge thermal shutdown fault!\n");
+	else if (status == REG09_FAULT_CHRG_TIMER)
+		pr_err("charge timer expired fault!\n");
+	
+	if (bq->fault_status & REG09_FAULT_BAT_MASK)
+		pr_err("battery ovp fault!\n");
+
+	if (!bq->software_jeita_supported) {
+		status = (bq->fault_status & REG09_FAULT_NTC_MASK) >> REG09_FAULT_NTC_SHIFT;
+	
+		if (status == REG09_FAULT_NTC_WARM)
+			pr_debug("JEITA ACTIVE: WARM\n");
+		else if (status == REG09_FAULT_NTC_COOL)
+			pr_debug("JEITA ACTIVE: COOL\n");
+		else if (status == REG09_FAULT_NTC_COLD)
+			pr_debug("JEITA ACTIVE: COLD\n");
+		else if (status == REG09_FAULT_NTC_HOT)
+			pr_debug("JEITA ACTIVE: HOT!\n");
+	} else if (bq->jeita_active) {
+		if (bq->batt_hot)
+			pr_debug("JEITA ACTIVE: HOT\n");
+		else if (bq->batt_warm)
+			pr_debug("JEITA ACTIVE: WARM\n");
+		else if (bq->batt_cool)
+			pr_debug("JEITA ACTIVE: COOL\n");
+		else if (bq->batt_cold)
+			pr_debug("JEITA ACTIVE: COLD\n");
+	}
+
+	pr_err("%s\n",charge_stat_str[bq->charge_state]);
+}
+
+
+static void bq2560x_update_status(struct bq2560x *bq)
+{
+	u8 status;
+	int ret;
+
+	/* Read twice to get present status */
+	ret = bq2560x_read_byte(bq, &status, BQ2560X_REG_09);
+	if (ret)
+		return;
+	pr_err("First read of REG[09] = 0x%02x\n", status);
+	ret = bq2560x_read_byte(bq, &status, BQ2560X_REG_09);
+	if (ret)
+		return;
+
+	pr_err("Second read of REG[09] = 0x%02x\n", status);
+	mutex_lock(&bq->data_lock);
+	bq->fault_status = status;
+	mutex_unlock(&bq->data_lock);
+
+}
+
+
+static irqreturn_t bq2560x_charger_interrupt(int irq, void *dev_id)
+{
+	struct bq2560x *bq = dev_id;
+	
+	u8 status;
+	int ret;	
+	
+	mutex_lock(&bq->irq_complete);
+	bq->irq_waiting = true;
+	if (!bq->resume_completed) {
+		dev_dbg(bq->dev, "IRQ triggered before device-resume\n");
+		if (!bq->irq_disabled) {
+			disable_irq_nosync(irq);
+			bq->irq_disabled = true;
+		}
+		mutex_unlock(&bq->irq_complete);
+		return IRQ_HANDLED;
+	}
+	bq->irq_waiting = false;
+	ret = bq2560x_read_byte(bq, &status, BQ2560X_REG_08);
+	if (ret) {
+		mutex_unlock(&bq->irq_complete);
+		return IRQ_HANDLED;
+	}
+	
+	mutex_lock(&bq->data_lock);
+	bq->power_good = !!(status & REG08_PG_STAT_MASK);
+	mutex_unlock(&bq->data_lock);
+
+	if(!bq->power_good) {
+	    if(bq->usb_present) {
+			bq->usb_present = false;
+			power_supply_set_present(bq->usb_psy, bq->usb_present);
+		}
+
+		if (bq->software_jeita_supported) {
+			alarm_try_to_cancel(&bq->jeita_alarm);
+		}
+		
+		bq2560x_disable_watchdog_timer(bq);
+
+		schedule_delayed_work(&bq->discharge_jeita_work,
+					calculate_jeita_poll_interval(bq) * HZ);
+
+		pr_err("usb removed, set usb present = %d\n", bq->usb_present);
+	} else if (bq->power_good && !bq->usb_present) {
+		bq->usb_present = true;
+		msleep(10);/*for cdp detect*/
+		power_supply_set_present(bq->usb_psy, bq->usb_present);
+
+		cancel_delayed_work(&bq->discharge_jeita_work);
+
+		if (bq->software_jeita_supported) { 
+			ret = alarm_start_relative(&bq->jeita_alarm, 
+						ns_to_ktime(1 * 1000000000LL));
+			if (ret) 
+				pr_err("start alarm for JEITA detection failed, ret=%d\n",
+							ret);
+		}
+		
+		bq2560x_set_watchdog_timer(bq, 80);
+
+		pr_err("usb plugged in, set usb present = %d\n", bq->usb_present);
+	}
+	
+	bq2560x_update_status(bq);
+
+	mutex_unlock(&bq->irq_complete);
+
+	power_supply_changed(&bq->batt_psy);
+
+	return IRQ_HANDLED;
+}
+
+
+static void determine_initial_status(struct bq2560x *bq)
+{
+	int ret;
+	u8 status = 0;
+	ret = bq2560x_get_hiz_mode(bq, &status);
+	if (!ret) 
+		bq->in_hiz = !!status;
+
+	bq2560x_charger_interrupt(bq->client->irq, bq);
+}
+
+
+static ssize_t bq2560x_show_registers(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct bq2560x *bq = dev_get_drvdata(dev);
+	u8 addr;
+	u8 val;
+	u8 tmpbuf[200];
+	int len;
+	int idx = 0;
+	int ret ;
+
+	idx = snprintf(buf, PAGE_SIZE, "%s:\n", "bq2560x Reg");
+	for (addr = 0x0; addr <= 0x0B; addr++) {
+		ret = bq2560x_read_byte(bq, &val, addr);
+		if (ret == 0) {
+			len = snprintf(tmpbuf, PAGE_SIZE - idx,"Reg[0x%.2x] = 0x%.2x\n", addr, val);
+			memcpy(&buf[idx], tmpbuf, len);
+			idx += len;
+		}
+	}
+
+	return idx;
+}
+
+static ssize_t bq2560x_store_registers(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct bq2560x *bq = dev_get_drvdata(dev);
+	int ret;
+	unsigned int reg;
+	unsigned int val;
+
+	ret = sscanf(buf, "%x %x", &reg, &val);
+	if (ret == 2 && reg < 0x0B) {
+		bq2560x_write_byte(bq, (unsigned char)reg, (unsigned char)val);
+	}
+
+	return count;
+}
+
+static ssize_t bq2560x_battery_test_status_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", BatteryTestStatus_enable);
+}
+static ssize_t bq2560x_battery_test_status_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int retval;
+	unsigned int input;
+
+	if (sscanf(buf, "%u", &input) != 1)
+		retval = -EINVAL;
+	else
+	        BatteryTestStatus_enable = input;
+
+	pr_err("BatteryTestStatus_enable = %d\n", BatteryTestStatus_enable);
+
+	return retval;
+}
+
+static ssize_t bq2560x_show_hiz(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct bq2560x *bq = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", bq->in_hiz);
+}
+
+static ssize_t bq2560x_store_hiz(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct bq2560x *bq = dev_get_drvdata(dev);
+	int ret;
+	unsigned int val;
+
+	ret = sscanf(buf, "%d", &val);
+	if (ret == 1) {
+		if (val)
+			ret = bq2560x_enter_hiz_mode(bq);
+		else 
+			ret = bq2560x_exit_hiz_mode(bq);
+	}
+	if (!ret)
+		bq->in_hiz = !!val;
+
+	return ret;
+}
+
+static ssize_t bq2560x_show_dis_safety(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct bq2560x *bq = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", bq->dis_safety);
+}
+
+static ssize_t bq2560x_store_dis_safety(struct device *dev,
+			struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct bq2560x *bq = dev_get_drvdata(dev);
+	int ret;
+	unsigned int val;
+
+	ret = sscanf(buf, "%d", &val);
+	if (ret == 1) {
+		if (val)
+			ret = bq2560x_disable_safety_timer(bq);
+		else 
+			ret = bq2560x_enable_safety_timer(bq);
+	}
+	if (!ret)
+		bq->dis_safety = !!val;
+
+	return count;
+}
+
+static DEVICE_ATTR(registers, S_IRUGO | S_IWUSR, bq2560x_show_registers, bq2560x_store_registers);
+static DEVICE_ATTR(BatteryTestStatus, S_IRUGO | S_IWUSR, bq2560x_battery_test_status_show, bq2560x_battery_test_status_store);
+static DEVICE_ATTR(hiz, S_IRUGO | S_IWUSR, bq2560x_show_hiz, bq2560x_store_hiz);
+static DEVICE_ATTR(dissafety, S_IRUGO | S_IWUSR, bq2560x_show_dis_safety, bq2560x_store_dis_safety);
+
+static struct attribute *bq2560x_attributes[] = {
+	&dev_attr_registers.attr,
+	&dev_attr_BatteryTestStatus.attr,
+	&dev_attr_hiz.attr,
+	&dev_attr_dissafety.attr,
+	NULL,
+};
+
+static const struct attribute_group bq2560x_attr_group = {
+	.attrs = bq2560x_attributes,
+};
+
+
+static int show_registers(struct seq_file *m, void *data)
+{
+	struct bq2560x *bq = m->private;
+	u8 addr;
+	int ret;
+	u8 val;
+	
+	for (addr = 0x0; addr <= 0x0B; addr++) {
+		ret = bq2560x_read_byte(bq, &val, addr);
+		if (!ret)
+			seq_printf(m, "Reg[%02X] = 0x%02X\n", addr, val);
+	}
+	return 0;	
+}
+
+
+static int reg_debugfs_open(struct inode *inode, struct file *file)
+{
+	struct bq2560x *bq = inode->i_private;
+	
+	return single_open(file, show_registers, bq);
+}
+
+
+static const struct file_operations reg_debugfs_ops = {
+	.owner		= THIS_MODULE,
+	.open		= reg_debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void create_debugfs_entry(struct bq2560x *bq)
+{
+	bq->debug_root = debugfs_create_dir("bq2560x", NULL);
+	if (!bq->debug_root)
+		pr_err("Failed to create debug dir\n");
+	
+	if (bq->debug_root) {
+		
+		debugfs_create_file("registers", S_IFREG | S_IRUGO,
+						bq->debug_root, bq, &reg_debugfs_ops);
+
+		debugfs_create_x32("charging_disable_status", S_IFREG | S_IRUGO,
+						bq->debug_root, &(bq->charging_disabled_status));
+
+		debugfs_create_x32("fault_status", S_IFREG | S_IRUGO,
+						bq->debug_root, &(bq->fault_status));
+
+		debugfs_create_x32("vbus_type", S_IFREG | S_IRUGO,
+						bq->debug_root, &(bq->vbus_type));						
+
+		debugfs_create_x32("charge_state", S_IFREG | S_IRUGO,
+						bq->debug_root, &(bq->charge_state));							
+
+		debugfs_create_x32("skip_reads",
+					  S_IFREG | S_IWUSR | S_IRUGO,
+					  bq->debug_root,
+					  &(bq->skip_reads));
+		debugfs_create_x32("skip_writes",
+					  S_IFREG | S_IWUSR | S_IRUGO,
+					  bq->debug_root,
+					  &(bq->skip_writes));
+	}	
+}
+
+
+static int bq2560x_charger_probe(struct i2c_client *client, 
+					const struct i2c_device_id *id)
+{
+	struct bq2560x *bq;
+	struct power_supply *usb_psy;
+	struct power_supply *bms_psy;
+
+	int ret;
+	
+	usb_psy = power_supply_get_by_name("usb");
+	if (!usb_psy) {
+		dev_dbg(&client->dev, "USB supply not found, defer probe\n");
+		return -EPROBE_DEFER;
+	}
+
+	bms_psy = power_supply_get_by_name("bms");
+	if (!bms_psy) {
+		dev_dbg(&client->dev, "bms supply not found, defer probe\n");
+		return -EPROBE_DEFER;
+	}
+
+	bq = devm_kzalloc(&client->dev, sizeof(struct bq2560x), GFP_KERNEL);
+	if (!bq) {
+		pr_err("Out of memory\n");
+		return -ENOMEM;
+	}
+
+	bq->dev = &client->dev;
+	bq->usb_psy = usb_psy;
+	bq->bms_psy = bms_psy;
+
+	bq->client = client;
+	i2c_set_clientdata(client, bq);
+	
+	mutex_init(&bq->i2c_rw_lock);
+	mutex_init(&bq->data_lock);
+	mutex_init(&bq->profile_change_lock);
+	mutex_init(&bq->charging_disable_lock);
+	mutex_init(&bq->irq_complete);
+
+	bq->resume_completed = true;
+	bq->irq_waiting = false;
+	
+	ret = bq2560x_detect_device(bq);
+	if(ret) {
+		pr_err("No bq2560x device found!\n");
+		return -ENODEV;
+	}
+	
+	bq2560x_init_jeita(bq);
+
+	if (client->dev.of_node)
+		bq->platform_data = bq2560x_parse_dt(&client->dev, bq);
+	else
+		bq->platform_data = client->dev.platform_data;
+	
+	if (!bq->platform_data) {
+		pr_err("No platform data provided.\n");
+		return -EINVAL;
+	}
+
+	if (gpio_is_valid(bq->gpio_ce)) {
+		ret = devm_gpio_request(&client->dev, bq->gpio_ce, "bq2560x_ce");
+		if (ret) {
+			pr_err("Failed to request chip enable gpio %d:, err: %d\n", bq->gpio_ce, ret);
+			return ret;
+		}
+		gpio_direction_output(bq->gpio_ce, 0);
+	}
+
+	ret = bq2560x_init_device(bq);
+	if (ret) {
+		pr_err("Failed to init device\n");
+		return ret;
+	}
+
+	
+	ret = bq2560x_psy_register(bq);
+	if (ret)
+		return ret;
+	ret = bq2560x_regulator_init(bq);
+	if (ret) {
+		pr_err("Couldn't initialize bq2560x regulator ret=%d\n", ret);
+		return ret;
+	}
+
+	INIT_DELAYED_WORK(&bq->charge_jeita_work, bq2560x_charge_jeita_workfunc);
+	INIT_DELAYED_WORK(&bq->discharge_jeita_work, bq2560x_discharge_jeita_workfunc);
+
+	alarm_init(&bq->jeita_alarm, ALARM_BOOTTIME, bq2560x_jeita_alarm_cb);
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+				bq2560x_charger_interrupt,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"bq2560x charger irq", bq);
+		if (ret < 0) {
+			pr_err("request irq for irq=%d failed, ret =%d\n", client->irq, ret);
+			goto err_1;
+		}
+		enable_irq_wake(client->irq);
+	}
+
+	bq2560x_wakeup_src_init(bq);
+
+	device_init_wakeup(bq->dev, 1);	
+	create_debugfs_entry(bq);
+
+	ret = sysfs_create_group(&bq->dev->kobj, &bq2560x_attr_group);
+	if (ret) {
+		dev_err(bq->dev, "failed to register sysfs. err: %d\n", ret);
+	}
+
+	determine_initial_status(bq);
+
+
+	pr_err("bq2560x probe successfully, Part Num:%d, Revision:%d\n!", 
+				bq->part_no, bq->revision);
+	
+	return 0;
+	
+err_1:
+	bq2560x_psy_unregister(bq);
+	
+	return ret;
+}
+
+static inline bool is_device_suspended(struct bq2560x *bq)
+{
+	return !bq->resume_completed;
+}
+
+static int bq2560x_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq2560x *bq = i2c_get_clientdata(client);
+
+	mutex_lock(&bq->irq_complete);
+	bq->resume_completed = false;
+	mutex_unlock(&bq->irq_complete);
+
+	return 0;
+}
+
+static int bq2560x_suspend_noirq(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq2560x *bq = i2c_get_clientdata(client);
+
+	if (bq->irq_waiting) {
+		pr_err_ratelimited("Aborting suspend, an interrupt was detected while suspending\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static int bq2560x_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq2560x *bq = i2c_get_clientdata(client);
+
+
+	mutex_lock(&bq->irq_complete);
+	bq->resume_completed = true;
+	if (bq->irq_waiting) {
+		bq->irq_disabled = false;
+		enable_irq(client->irq);
+		mutex_unlock(&bq->irq_complete);
+		bq2560x_charger_interrupt(client->irq, bq);
+	} else {
+		mutex_unlock(&bq->irq_complete);
+	}
+
+	power_supply_changed(&bq->batt_psy);
+
+	return 0;
+}
+static int bq2560x_charger_remove(struct i2c_client *client)
+{
+	struct bq2560x *bq = i2c_get_clientdata(client);
+
+	alarm_try_to_cancel(&bq->jeita_alarm);
+
+	cancel_delayed_work_sync(&bq->charge_jeita_work);
+	cancel_delayed_work_sync(&bq->discharge_jeita_work);
+
+	regulator_unregister(bq->otg_vreg.rdev);
+	
+	bq2560x_psy_unregister(bq);
+
+	mutex_destroy(&bq->charging_disable_lock);
+	mutex_destroy(&bq->profile_change_lock);
+	mutex_destroy(&bq->data_lock);
+	mutex_destroy(&bq->i2c_rw_lock);
+	mutex_destroy(&bq->irq_complete);
+
+	debugfs_remove_recursive(bq->debug_root);
+	sysfs_remove_group(&bq->dev->kobj, &bq2560x_attr_group);
+
+
+	return 0;
+}
+
+
+static void bq2560x_charger_shutdown(struct i2c_client *client)
+{
+}
+
+static struct of_device_id bq2560x_charger_match_table[] = {
+	{.compatible = "ti,bq25600-charger",},
+	{.compatible = "ti,bq25601-charger",},
+	{},
+};
+MODULE_DEVICE_TABLE(of,bq2560x_charger_match_table);
+
+static const struct i2c_device_id bq2560x_charger_id[] = {
+	{ "bq25600-charger", BQ25600 },
+	{ "bq25601-charger", BQ25601 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq2560x_charger_id);
+
+static const struct dev_pm_ops bq2560x_pm_ops = {
+	.resume		= bq2560x_resume,
+	.suspend_noirq = bq2560x_suspend_noirq,
+	.suspend	= bq2560x_suspend,
+};
+static struct i2c_driver bq2560x_charger_driver = {
+	.driver 	= {
+		.name 	= "bq2560x-charger",
+		.owner 	= THIS_MODULE,
+		.of_match_table = bq2560x_charger_match_table,
+		.pm		= &bq2560x_pm_ops,
+	},
+	.id_table	= bq2560x_charger_id,
+	
+	.probe		= bq2560x_charger_probe,
+	.remove		= bq2560x_charger_remove,
+	.shutdown	= bq2560x_charger_shutdown,
+	
+};
+
+module_i2c_driver(bq2560x_charger_driver);
+
+MODULE_DESCRIPTION("TI BQ2560x Charger Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Texas Instruments");

linux_kernel_modules/bq25601/bq2560x_reg.h

+
+#ifndef __BQ2560X_HEADER__
+#define __BQ2560X_HEADER__
+
+/* Register 00h */
+#define BQ2560X_REG_00      		0x00
+#define REG00_ENHIZ_MASK		    0x80
+#define REG00_ENHIZ_SHIFT		    7
+#define	REG00_HIZ_ENABLE			1
+#define	REG00_HIZ_DISABLE			0
+
+#define	REG00_STAT_CTRL_MASK		0x60
+#define REG00_STAT_CTRL_SHIFT		5
+#define	REG00_STAT_CTRL_STAT		0
+#define	REG00_STAT_CTRL_ICHG		1
+#define	REG00_STAT_CTRL_IINDPM		2
+#define	REG00_STAT_CTRL_DISABLE		3
+
+#define REG00_IINLIM_MASK		    0x1F
+#define REG00_IINLIM_SHIFT			0
+#define	REG00_IINLIM_LSB			100
+#define	REG00_IINLIM_BASE			100
+
+/* Register 01h */
+#define BQ2560X_REG_01		    	0x01
+#define REG01_PFM_DIS_MASK	      	0x80
+#define	REG01_PFM_DIS_SHIFT			7
+#define	REG01_PFM_ENABLE			0
+#define	REG01_PFM_DISABLE			1
+
+#define REG01_WDT_RESET_MASK		0x40
+#define REG01_WDT_RESET_SHIFT		6
+#define REG01_WDT_RESET				1
+
+#define	REG01_OTG_CONFIG_MASK		0x20
+#define	REG01_OTG_CONFIG_SHIFT		5
+#define	REG01_OTG_ENABLE			1
+#define	REG01_OTG_DISABLE			0
+
+#define REG01_CHG_CONFIG_MASK     	0x10
+#define REG01_CHG_CONFIG_SHIFT    	4
+#define REG01_CHG_DISABLE        	0
+#define REG01_CHG_ENABLE         	1
+
+#define REG01_SYS_MINV_MASK       	0x0E
+#define REG01_SYS_MINV_SHIFT      	1
+
+#define	REG01_MIN_VBAT_SEL_MASK		0x01
+#define	REG01_MIN_VBAT_SEL_SHIFT	0
+#define	REG01_MIN_VBAT_2P8V			0
+#define	REG01_MIN_VBAT_2P5V			1
+
+
+/* Register 0x02*/
+#define BQ2560X_REG_02              0x02
+#define	REG02_BOOST_LIM_MASK		0x80
+#define	REG02_BOOST_LIM_SHIFT		7
+#define	REG02_BOOST_LIM_0P5A		0
+#define	REG02_BOOST_LIM_1P2A		1
+
+#define	REG02_Q1_FULLON_MASK		0x40
+#define	REG02_Q1_FULLON_SHIFT		6
+#define	REG02_Q1_FULLON_ENABLE		1
+#define	REG02_Q1_FULLON_DISABLE		0
+
+#define REG02_ICHG_MASK           	0x3F
+#define REG02_ICHG_SHIFT          	0
+#define REG02_ICHG_BASE           	0
+#define REG02_ICHG_LSB            	60
+
+/* Register 0x03*/
+#define BQ2560X_REG_03              	0x03
+#define REG03_IPRECHG_MASK        	0xF0
+#define REG03_IPRECHG_SHIFT       	4
+#define REG03_IPRECHG_BASE        	60
+#define REG03_IPRECHG_LSB         	60
+
+#define REG03_ITERM_MASK          	0x0F
+#define REG03_ITERM_SHIFT         	0
+#define REG03_ITERM_BASE          	60
+#define REG03_ITERM_LSB           	60
+
+
+/* Register 0x04*/
+#define BQ2560X_REG_04              0x04
+#define REG04_VREG_MASK           	0xF8
+#define REG04_VREG_SHIFT          	3
+#define REG04_VREG_BASE           	3856
+#define REG04_VREG_LSB            	32
+
+#define	REG04_TOPOFF_TIMER_MASK		0x06
+#define	REG04_TOPOFF_TIMER_SHIFT	1
+#define	REG04_TOPOFF_TIMER_DISABLE	0
+#define	REG04_TOPOFF_TIMER_15M		1
+#define	REG04_TOPOFF_TIMER_30M		2
+#define	REG04_TOPOFF_TIMER_45M		3
+
+
+#define REG04_VRECHG_MASK         	0x01
+#define REG04_VRECHG_SHIFT        	0
+#define REG04_VRECHG_100MV        	0
+#define REG04_VRECHG_200MV        	1
+
+/* Register 0x05*/
+#define BQ2560X_REG_05             	0x05
+#define REG05_EN_TERM_MASK        	0x80
+#define REG05_EN_TERM_SHIFT       	7
+#define REG05_TERM_ENABLE         	1
+#define REG05_TERM_DISABLE        	0
+
+#define REG05_WDT_MASK            	0x30
+#define REG05_WDT_SHIFT           	4
+#define REG05_WDT_DISABLE         	0
+#define REG05_WDT_40S             	1
+#define REG05_WDT_80S             	2
+#define REG05_WDT_160S            	3
+#define REG05_WDT_BASE            	0
+#define REG05_WDT_LSB             	40
+
+#define REG05_EN_TIMER_MASK       	0x08
+#define REG05_EN_TIMER_SHIFT      	3
+#define REG05_CHG_TIMER_ENABLE    	1
+#define REG05_CHG_TIMER_DISABLE   	0
+
+#define REG05_CHG_TIMER_MASK      	0x04
+#define REG05_CHG_TIMER_SHIFT     	2
+#define REG05_CHG_TIMER_5HOURS    	0
+#define REG05_CHG_TIMER_10HOURS   	1
+
+#define	REG05_TREG_MASK				0x02
+#define	REG05_TREG_SHIFT			1
+#define	REG05_TREG_90C				0
+#define	REG05_TREG_110C				1
+
+#define REG05_JEITA_ISET_MASK     	0x01
+#define REG05_JEITA_ISET_SHIFT    	0
+#define REG05_JEITA_ISET_50PCT    	0
+#define REG05_JEITA_ISET_20PCT    	1
+
+
+/* Register 0x06*/
+#define BQ2560X_REG_06              0x06
+#define	REG06_OVP_MASK				0xC0
+#define	REG06_OVP_SHIFT				0x6
+#define	REG06_OVP_5P5V				0
+#define	REG06_OVP_6P2V				1
+#define	REG06_OVP_10P5V				2
+#define	REG06_OVP_14P3V				3
+
+#define	REG06_BOOSTV_MASK			0x30
+#define	REG06_BOOSTV_SHIFT			4
+#define	REG06_BOOSTV_4P85V			0
+#define	REG06_BOOSTV_5V				1
+#define	REG06_BOOSTV_5P15V			2
+#define	REG06_BOOSTV_5P3V			3
+
+#define	REG06_VINDPM_MASK			0x0F
+#define	REG06_VINDPM_SHIFT			0
+#define	REG06_VINDPM_BASE			3900
+#define	REG06_VINDPM_LSB			100
+
+/* Register 0x07*/
+#define BQ2560X_REG_07              0x07
+#define REG07_FORCE_DPDM_MASK     	0x80
+#define REG07_FORCE_DPDM_SHIFT    	7
+#define REG07_FORCE_DPDM          	1
+
+#define REG07_TMR2X_EN_MASK       	0x40
+#define REG07_TMR2X_EN_SHIFT      	6
+#define REG07_TMR2X_ENABLE        	1
+#define REG07_TMR2X_DISABLE       	0
+
+#define REG07_BATFET_DIS_MASK     	0x20
+#define REG07_BATFET_DIS_SHIFT    	5
+#define REG07_BATFET_OFF          	1
+#define REG07_BATFET_ON          	0
+
+#define REG07_JEITA_VSET_MASK     	0x10
+#define REG07_JEITA_VSET_SHIFT    	4
+#define REG07_JEITA_VSET_4100     	0
+#define REG07_JEITA_VSET_VREG     	1
+
+#define	REG07_BATFET_DLY_MASK		0x08
+#define	REG07_BATFET_DLY_SHIFT		3
+#define	REG07_BATFET_DLY_0S			0
+#define	REG07_BATFET_DLY_10S		1
+
+#define	REG07_BATFET_RST_EN_MASK	0x04
+#define	REG07_BATFET_RST_EN_SHIFT	2
+#define	REG07_BATFET_RST_DISABLE	0
+#define	REG07_BATFET_RST_ENABLE		1
+
+#define	REG07_VDPM_BAT_TRACK_MASK	0x03
+#define	REG07_VDPM_BAT_TRACK_SHIFT 	0
+#define	REG07_VDPM_BAT_TRACK_DISABLE	0
+#define	REG07_VDPM_BAT_TRACK_200MV	1
+#define	REG07_VDPM_BAT_TRACK_250MV	2
+#define	REG07_VDPM_BAT_TRACK_300MV	3
+
+/* Register 0x08*/
+#define BQ2560X_REG_08              0x08
+#define REG08_VBUS_STAT_MASK      0xE0           
+#define REG08_VBUS_STAT_SHIFT     5
+#define REG08_VBUS_TYPE_NONE	  0
+#define REG08_VBUS_TYPE_USB       1
+#define REG08_VBUS_TYPE_ADAPTER   3
+#define REG08_VBUS_TYPE_OTG       7
+
+#define REG08_CHRG_STAT_MASK      0x18
+#define REG08_CHRG_STAT_SHIFT     3
+#define REG08_CHRG_STAT_IDLE      0
+#define REG08_CHRG_STAT_PRECHG    1
+#define REG08_CHRG_STAT_FASTCHG   2
+#define REG08_CHRG_STAT_CHGDONE   3
+
+#define REG08_PG_STAT_MASK        0x04
+#define REG08_PG_STAT_SHIFT       2
+#define REG08_POWER_GOOD          1
+
+#define REG08_THERM_STAT_MASK     0x02
+#define REG08_THERM_STAT_SHIFT    1
+
+#define REG08_VSYS_STAT_MASK      0x01
+#define REG08_VSYS_STAT_SHIFT     0
+#define REG08_IN_VSYS_STAT        1
+
+
+/* Register 0x09*/
+#define BQ2560X_REG_09              0x09
+#define REG09_FAULT_WDT_MASK      0x80
+#define REG09_FAULT_WDT_SHIFT     7
+#define REG09_FAULT_WDT           1
+
+#define REG09_FAULT_BOOST_MASK    0x40
+#define REG09_FAULT_BOOST_SHIFT   6
+
+#define REG09_FAULT_CHRG_MASK     0x30
+#define REG09_FAULT_CHRG_SHIFT    4
+#define REG09_FAULT_CHRG_NORMAL   0
+#define REG09_FAULT_CHRG_INPUT    1
+#define REG09_FAULT_CHRG_THERMAL  2
+#define REG09_FAULT_CHRG_TIMER    3
+
+#define REG09_FAULT_BAT_MASK      0x08
+#define REG09_FAULT_BAT_SHIFT     3
+#define	REG09_FAULT_BAT_OVP		1
+
+#define REG09_FAULT_NTC_MASK      0x07
+#define REG09_FAULT_NTC_SHIFT     0
+#define	REG09_FAULT_NTC_NORMAL		0
+#define REG09_FAULT_NTC_WARM      2
+#define REG09_FAULT_NTC_COOL      3
+#define REG09_FAULT_NTC_COLD      5
+#define REG09_FAULT_NTC_HOT       6
+
+
+/* Register 0x0A */
+#define BQ2560X_REG_0A              0x0A
+#define	REG0A_VBUS_GD_MASK			0x80
+#define	REG0A_VBUS_GD_SHIFT			7
+#define	REG0A_VBUS_GD				1
+
+#define	REG0A_VINDPM_STAT_MASK		0x40
+#define	REG0A_VINDPM_STAT_SHIFT		6
+#define	REG0A_VINDPM_ACTIVE			1
+
+#define	REG0A_IINDPM_STAT_MASK		0x20
+#define	REG0A_IINDPM_STAT_SHIFT		5
+#define	REG0A_IINDPM_ACTIVE			1
+
+#define	REG0A_TOPOFF_ACTIVE_MASK	0x08
+#define	REG0A_TOPOFF_ACTIVE_SHIFT	3
+#define	REG0A_TOPOFF_ACTIVE			1
+
+#define	REG0A_ACOV_STAT_MASK		0x04
+#define	REG0A_ACOV_STAT_SHIFT		2
+#define	REG0A_ACOV_ACTIVE			1
+
+#define	REG0A_VINDPM_INT_MASK		0x02
+#define	REG0A_VINDPM_INT_SHIFT		1
+#define	REG0A_VINDPM_INT_ENABLE		0
+#define	REG0A_VINDPM_INT_DISABLE	1
+
+#define	REG0A_IINDPM_INT_MASK		0x01
+#define	REG0A_IINDPM_INT_SHIFT		0
+#define	REG0A_IINDPM_INT_ENABLE		0
+#define	REG0A_IINDPM_INT_DISABLE	1
+
+#define	REG0A_INT_MASK_MASK			0x03
+#define	REG0A_INT_MASK_SHIFT		0
+
+
+#define	BQ2560X_REG_0B				0x0B
+#define	REG0B_REG_RESET_MASK		0x80
+#define	REG0B_REG_RESET_SHIFT		7
+#define	REG0B_REG_RESET				1
+
+#define REG0B_PN_MASK             	0x78
+#define REG0B_PN_SHIFT            	3
+
+#define REG0B_DEV_REV_MASK        	0x03
+#define REG0B_DEV_REV_SHIFT       	0
+
+
+#endif
+
+

linux_kernel_modules/expander/expander.c

+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/version.h>
+#include "expander.h"
+
+/*
+ *-----------------------------------------------------------------------------
+ * Constants
+ *-----------------------------------------------------------------------------
+ */
+#define GENERIC_LED		(4)
+#define PCM_SEL			(5)
+#define SDIO_SEL		(6)
+#define TRI_LED_BLU		(7)
+#define TRI_LED_GRN		(15)
+#define TRI_LED_RED		(10)
+#define BUZZER			(0)
+
+
+struct expander_device {
+	struct platform_device *pdev;
+	atomic_t generic_led_val, pcm_sel_val, sdio_sel_val, buzzer_val,
+	         tri_led_blu_val, tri_led_red_val, tri_led_grn_val;
+	int gpio_expander_base;
+};
+
+
+
+#define CREATE_SYSFS_DEFN(_var, _offset)                                       \
+static ssize_t _var##_show(struct device *dev,               \
+				   struct device_attribute *attr,    \
+				   char *buf)                        \
+{                                                                              \
+	struct expander_device* exp = dev_get_drvdata(dev);             \
+	return sprintf(buf, "%d\n", atomic_read(&exp->_var##_val));           \
+}\
+static int _var##_store(struct device *dev,                  \
+					  struct device_attribute *attr,       \
+					  const char *buf, size_t count)       \
+{                                                                              \
+	struct expander_device* exp = dev_get_drvdata(dev);             \
+	u8 val;                                                                \
+	int ret;							       \
+									       \
+	ret = kstrtou8(buf, 10, &val);					       \
+	if (ret || val > 1)						       \
+		return -EINVAL;						       \
+									       \
+	gpio_set_value_cansleep(exp->gpio_expander_base + _offset, val);       \
+	atomic_set(&exp->_var##_val, val);				       \
+									       \
+	return count;							       \
+}									       \
+static DEVICE_ATTR_RW(_var)
+
+CREATE_SYSFS_DEFN(generic_led, GENERIC_LED);
+CREATE_SYSFS_DEFN(pcm_sel, PCM_SEL);
+CREATE_SYSFS_DEFN(sdio_sel, SDIO_SEL);
+CREATE_SYSFS_DEFN(tri_led_blu, TRI_LED_BLU);
+CREATE_SYSFS_DEFN(tri_led_red, TRI_LED_RED);
+CREATE_SYSFS_DEFN(tri_led_grn, TRI_LED_GRN);
+CREATE_SYSFS_DEFN(buzzer, BUZZER);
+
+
+static void  gpio_initial_status(struct platform_device *pdev,
+				 struct device_attribute *attr,
+			         int function_number,int function_val,
+			         atomic_t *atomic_val)
+{
+
+	struct expander_device* exp = dev_get_drvdata(&pdev->dev);
+	
+
+	devm_gpio_request(&pdev->dev, exp->gpio_expander_base+function_number,
+				dev_name(&pdev->dev));
+
+	atomic_set(atomic_val, function_val);
+
+	 gpio_direction_output(exp->gpio_expander_base+function_number, 
+				    function_val);
+
+	device_create_file(&pdev->dev, attr);
+
+	
+}
+
+static void  gpio_final_status(struct platform_device *pdev,
+                               struct device_attribute *attr,
+			       int function_number,int function_val)
+{
+
+	struct expander_device* exp = dev_get_drvdata(&pdev->dev);
+	
+
+	device_remove_file(&pdev->dev, attr);
+
+	gpio_set_value_cansleep(exp->gpio_expander_base+function_number, function_val);
+
+	
+}
+
+
+
+static int expander_probe(struct platform_device *pdev)
+{
+	struct expander_device* dev;
+	int ret = 0;
+	struct expander_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+	dev_info(&pdev->dev, "%s(): probe\n", __func__);
+
+	if (!pdata) {
+		ret = -EINVAL;
+		dev_err(&pdev->dev, "Required platform data not provided\n");
+		goto  done;
+	}
+
+	/* Create the driver data and remove the allocated memory when driver 
+	   is removed */
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	dev->pdev = pdev;
+ 	dev->gpio_expander_base = pdata->gpio_expander_base;
+        
+        gpio_initial_status(pdev,&dev_attr_generic_led, GENERIC_LED, 0, &dev->generic_led_val); 
+        gpio_initial_status(pdev,&dev_attr_pcm_sel, PCM_SEL, 0, &dev->pcm_sel_val);
+        gpio_initial_status(pdev,&dev_attr_sdio_sel, SDIO_SEL, 0, &dev->sdio_sel_val);  
+        gpio_initial_status(pdev,&dev_attr_tri_led_blu, TRI_LED_BLU, 0, &dev->tri_led_blu_val); 
+        gpio_initial_status(pdev,&dev_attr_tri_led_red, TRI_LED_RED, 0, &dev->tri_led_red_val); 
+ 	gpio_initial_status(pdev,&dev_attr_tri_led_grn, TRI_LED_GRN, 0, &dev->tri_led_grn_val);
+	gpio_initial_status(pdev,&dev_attr_buzzer, BUZZER, 0, &dev->buzzer_val);
+  
+	platform_set_drvdata(pdev, dev);
+
+done:
+	return ret;
+}
+
+static int expander_remove(struct platform_device *pdev)
+{
+//	struct expander_device* dev = dev_get_drvdata(&pdev->dev);
+	dev_info(&pdev->dev, "%s(): remove\n", __func__);
+
+	/* remove sysfs files & set final state values for gpio expander*/
+	gpio_final_status(pdev,&dev_attr_generic_led, GENERIC_LED, 0);
+        gpio_final_status(pdev,&dev_attr_pcm_sel, PCM_SEL, 0);
+	gpio_final_status(pdev,&dev_attr_sdio_sel, SDIO_SEL, 0);
+	gpio_final_status(pdev,&dev_attr_tri_led_blu, TRI_LED_BLU, 0);
+	gpio_final_status(pdev,&dev_attr_tri_led_red, TRI_LED_RED, 0);
+	gpio_final_status(pdev,&dev_attr_tri_led_grn, TRI_LED_GRN, 0);
+	gpio_final_status(pdev,&dev_attr_buzzer, BUZZER, 0);
+
+	return 0;
+}
+
+static const struct platform_device_id yellow_expander_ids[] = {
+	{"expander", (kernel_ulong_t)0},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, yellow_expander_ids);
+
+static struct platform_driver expander_driver = {
+	.probe		= expander_probe,
+	.remove		= expander_remove,
+	.driver		= {
+		.name	= "expander",
+		.owner	= THIS_MODULE,
+		.bus	= &platform_bus_type,
+	},
+	.id_table	= yellow_expander_ids,
+};
+
+static int __init expander_init(void)
+{
+	platform_driver_register(&expander_driver);
+	return 0;
+}
+
+static void __exit expander_exit(void)
+{
+	platform_driver_unregister(&expander_driver);
+}
+
+module_init(expander_init);
+module_exit(expander_exit);
+
+MODULE_ALIAS("platform:expander");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sierra Wireless");
+MODULE_DESCRIPTION("EXPANDER driver");
+MODULE_VERSION("0.1");

linux_kernel_modules/expander/expander.h

+#ifndef EXPANDER_H
+#define EXPANDER_H
+
+struct expander_platform_data {
+	int gpio_expander_base;
+};
+
+#endif /* EXPANDER_H */

linux_kernel_modules/expander/expander.mdef

+sources:
+{
+    expander.c
+}
+
+cflags:
+{
+//    -DDEBUG
+}
+
+params:
+{
+}

linux_kernel_modules/mangoh/mangoh_common.h

@@ -5,6 +5,14 @@
 
 /* TODO: There should be a better way to convert from WP GPIO numbers to real GPIO numbers */
 #if defined(CONFIG_ARCH_MSM9615) /* For WPX5XX */
+//#include "/opt/swi/y22-ext-SWI9X15Y_07.13.05.00/sysroots/armv7a-neon-poky-linux-gnueabi/usr/src/kernel/arch/arm/mach-msm/board-9615.h"
+
+#include <../arch/arm/mach-msm/board-9615.h>
+#elif defined(CONFIG_ARCH_MDM9607) /* For WP76XX */
+#include <../arch/arm/mach-msm/include/mach/swimcu.h>
+#endif
+
+#if defined(CONFIG_ARCH_MSM9615)
 #define PRIMARY_I2C_BUS (0)
 #define PRIMARY_SPI_BUS (0)
 
@@ -14,7 +22,10 @@
 #define CF3_GPIO8	(29)
 #define CF3_GPIO2	(59)
 #define CF3_GPIO33	(78)
+#define CF3_GPIO36     SWIMCU_GPIO_TO_SYS(2)
+
 #elif defined(CONFIG_ARCH_MDM9607) /* For WP76XX */
+
 #define PRIMARY_I2C_BUS (4)
 #define PRIMARY_SPI_BUS (1)
 
@@ -24,6 +35,7 @@
 #define CF3_GPIO8	(58)
 #define CF3_GPIO2	(38)
 #define CF3_GPIO33	(78)
+#define CF3_GPIO36     SWIMCU_GPIO_TO_SYS(2)
 #endif
 
 #endif /* MANGOH_COMMON_H */

linux_kernel_modules/mangoh/mangoh_yellow.c

@@ -4,8 +4,17 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/gpio/driver.h>
-
+#include <linux/platform_data/at24.h>
+#include <linux/gpio.h>
+#include  <linux/errno.h>
 #include "mangoh_common.h"
+#include "expander.h"
+//#include "bq25601-platform-data.h"
+//#include "bq27426-platform-data.h"
+#include <linux/i2c/pca954x.h>
+#include <linux/i2c/sx150x.h>
+
+
 
 /*
  *-----------------------------------------------------------------------------
@@ -13,11 +22,10 @@
  *-----------------------------------------------------------------------------
  */
 #define MANGOH_YELLOW_I2C_SW_BUS_BASE		(PRIMARY_I2C_BUS + 1)
-#define MANGOH_YELLOW_I2C_BUS_IOT0		(MANGOH_YELLOW_I2C_SW_BUS_BASE + 0)
-#define MANGOH_YELLOW_I2C_BUS_BATTERY_CHARGER	(MANGOH_YELLOW_I2C_SW_BUS_BASE + 1)
-#define MANGOH_YELLOW_I2C_BUS_USB_HUB		(MANGOH_YELLOW_I2C_SW_BUS_BASE + 1)
-#define MANGOH_YELLOW_I2C_BUS_GPIO_EXPANDER	(MANGOH_YELLOW_I2C_SW_BUS_BASE + 2)
-#define MANGOH_YELLOW_I2C_BUS_EXP		(MANGOH_YELLOW_I2C_SW_BUS_BASE + 3)
+#define MANGOH_YELLOW_I2C_BUS_PORT0	        (MANGOH_YELLOW_I2C_SW_BUS_BASE + 0)
+#define MANGOH_YELLOW_I2C_BUS_PORT1 		(MANGOH_YELLOW_I2C_SW_BUS_BASE + 1)
+#define MANGOH_YELLOW_I2C_BUS_PORT2		(MANGOH_YELLOW_I2C_SW_BUS_BASE + 2)
+#define MANGOH_YELLOW_I2C_BUS_PORT3		(MANGOH_YELLOW_I2C_SW_BUS_BASE + 3)
 
 /*
  *-----------------------------------------------------------------------------
@@ -25,7 +33,8 @@
  *-----------------------------------------------------------------------------
  */
 enum mangoh_yellow_board_rev {
-	MANGOH_YELLOW_BOARD_REV_DV1,
+	MANGOH_YELLOW_BOARD_REV_PROD,
+	MANGOH_YELLOW_BOARD_REV_DEV,
 };
 
 /*
@@ -36,6 +45,7 @@ enum mangoh_yellow_board_rev {
 static void mangoh_yellow_release(struct device* dev);
 static int mangoh_yellow_probe(struct platform_device* pdev);
 static int mangoh_yellow_remove(struct platform_device* pdev);
+static void mangoh_yellow_expander_release(struct device *dev);
 
 /*
  *-----------------------------------------------------------------------------
@@ -43,7 +53,9 @@ static int mangoh_yellow_remove(struct platform_device* pdev);
  *-----------------------------------------------------------------------------
  */
 
-static char *revision = "dv1";
+static char *revision_dev = "dev";
+static char *revision_prod = "prod";
+static char *revision = "dev";
 module_param(revision, charp, S_IRUGO);
 MODULE_PARM_DESC(revision, "mangOH Yellow board revision");
 
@@ -62,10 +74,19 @@ static struct mangoh_yellow_platform_data {
 } mangoh_yellow_pdata;
 
 static struct mangoh_yellow_driver_data {
-	struct i2c_client* bme680;
-	struct i2c_client* bmi088a;
-	struct i2c_client* bmi088g;
+        struct i2c_client* eeprom;
+	struct i2c_client* i2c_switch;
+      	struct i2c_client* imu;
+       	struct i2c_client* environmental;
+        struct i2c_client* rtc;
+        struct i2c_client* light;
+        struct i2c_client* magnetometer;
+        struct i2c_client* battery_gauge;
+	struct i2c_client* battery_charger;
+	struct i2c_client* gpio_expander;
+	bool   expander_registered;	
 } mangoh_yellow_driver_data = {
+	.expander_registered	= false, 
 };
 
 static struct platform_device mangoh_yellow_device = {
@@ -77,16 +98,81 @@ static struct platform_device mangoh_yellow_device = {
 	},
 };
 
-static struct i2c_board_info mangoh_yellow_bme680_devinfo = {
+static struct pca954x_platform_mode mangoh_yellow_pca954x_adap_modes[] = {
+	{.adap_id=MANGOH_YELLOW_I2C_SW_BUS_BASE + 0, .deselect_on_exit=1, .class=0},
+	{.adap_id=MANGOH_YELLOW_I2C_SW_BUS_BASE + 1, .deselect_on_exit=1, .class=0},
+	{.adap_id=MANGOH_YELLOW_I2C_SW_BUS_BASE + 2, .deselect_on_exit=1, .class=0},
+	{.adap_id=MANGOH_YELLOW_I2C_SW_BUS_BASE + 3, .deselect_on_exit=1, .class=0},
+};
+static struct pca954x_platform_data mangoh_yellow_pca954x_platform_data = {
+	mangoh_yellow_pca954x_adap_modes,
+	ARRAY_SIZE(mangoh_yellow_pca954x_adap_modes),
+};
+static const struct i2c_board_info mangoh_yellow_pca954x_device_info = {
+	I2C_BOARD_INFO("pca9546",0x71),
+	.platform_data = &mangoh_yellow_pca954x_platform_data,
+}; 
+
+static struct sx150x_platform_data mangoh_yellow_gpio_expander_platform_data = {
+	.gpio_base	    = -1,
+	.oscio_is_gpo	    = false,
+	.io_pullup_ena	    = 0,
+	.io_pulldn_ena	    = 0,
+	.io_open_drain_ena  = 0,
+	.io_polarity	    = 0,
+	.irq_summary	    = -1,
+	.irq_base	    = -1,
+	.reset_during_probe = true,
+};
+static const struct i2c_board_info mangoh_yellow_gpio_expander_devinfo = {
+	I2C_BOARD_INFO("sx1509q",0x3e),
+	.platform_data = &mangoh_yellow_gpio_expander_platform_data,
+	.irq = 0,
+};
+static struct i2c_board_info mangoh_yellow_imu_devinfo = {
+	I2C_BOARD_INFO("bmi160", 0x68),
+};
+static struct i2c_board_info mangoh_yellow_environmental_devinfo = {
 	I2C_BOARD_INFO("bme680", 0x76),
 };
-
-static struct i2c_board_info mangoh_yellow_bmi088a_devinfo = {
-	I2C_BOARD_INFO("bmi088a", 0x18),
+static struct i2c_board_info mangoh_yellow_rtc_devinfo = {
+	I2C_BOARD_INFO("pcf85063", 0x51),
 };
-
-static struct i2c_board_info mangoh_yellow_bmi088g_devinfo = {
-	I2C_BOARD_INFO("bmi088g", 0x68),
+static struct i2c_board_info mangoh_yellow_battery_charger_devinfo = {
+	I2C_BOARD_INFO("bq25601", 0x6b),
+};
+static struct i2c_board_info mangoh_yellow_battery_gauge_devinfo = {
+	I2C_BOARD_INFO("bq27426", 0x55),
+};
+static struct i2c_board_info mangoh_yellow_magnetometer_devinfo = {
+	I2C_BOARD_INFO("bmm150", 0x10),
+};
+static struct i2c_board_info mangoh_yellow_light_devinfo = {
+	I2C_BOARD_INFO("opt3002", 0x44),
+        };
+static struct expander_platform_data mangoh_yellow_expander_platform_data = {
+	.gpio_expander_base = -1,
+};
+static struct platform_device mangoh_yellow_expander = {
+	.name = "expander",
+	.dev = {
+		.platform_data = &mangoh_yellow_expander_platform_data,
+		.release = mangoh_yellow_expander_release,
+		},
+};
+/*
+ * The EEPROM is marked as read-only to prevent accidental writes. The mangOH
+ * Yellow has the write protect (WP) pin pulled high which has the effect of making
+ * the upper 1/4 of the address space of the EEPROM write protected by hardware.
+ */
+static struct at24_platform_data mangoh_yellow_eeprom_data = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = (AT24_FLAG_ADDR16 | AT24_FLAG_READONLY),
+};
+static struct i2c_board_info mangoh_yellow_eeprom_info = {
+	I2C_BOARD_INFO("at24", 0x51),
+	.platform_data = &mangoh_yellow_eeprom_data,
 };
 
 static void mangoh_yellow_release(struct device* dev)
@@ -97,7 +183,9 @@ static void mangoh_yellow_release(struct device* dev)
 static int mangoh_yellow_probe(struct platform_device* pdev)
 {
 	int ret = 0;
-	struct i2c_adapter *i2c_adapter_primary;
+	struct i2c_adapter *i2c_adapter_primary, *i2c_adapter_port1 = NULL,
+		*i2c_adapter_port2 = NULL, *i2c_adapter_port3 = NULL;
+	struct gpio_chip *gpio_expander;
 
 	dev_info(&pdev->dev, "%s(): probe\n", __func__);
 
@@ -108,44 +196,155 @@ static int mangoh_yellow_probe(struct platform_device* pdev)
 		ret = -ENODEV;
 		goto done;
 	}
-
-	/*
-	 * This is a workaround of questionable validity for USB issues first
-	 * seen on the mangOH Green.
-	 */
+        
+       /* This is a workaround that needs to be tested more for issue first seen on 
+	* mangOH Green 
+	*/
 	msleep(5000);
 
 	platform_set_drvdata(pdev, &mangoh_yellow_driver_data);
 
-	/* Map the I2C BME680 humidity/gas/temp/pressure sensor */
-	dev_dbg(&pdev->dev, "mapping bme680 gas/temperature/pressure sensor\n");
-	mangoh_yellow_driver_data.bme680 =
-		i2c_new_device(i2c_adapter_primary, &mangoh_yellow_bme680_devinfo);
-	if (!mangoh_yellow_driver_data.bme680) {
-		dev_err(&pdev->dev, "Gas/Humidity/Temp sensor is missing\n");
+       /* map the EEPROM */
+	dev_dbg(&pdev->dev, "mapping eeprom\n");
+	mangoh_yellow_driver_data.eeprom =
+		i2c_new_device(i2c_adapter_primary, &mangoh_yellow_eeprom_info);
+	if (!mangoh_yellow_driver_data.eeprom) {
+		dev_err(&pdev->dev, "Failed to register %s\n",
+			mangoh_yellow_eeprom_info.type);
 		ret = -ENODEV;
 		goto cleanup;
 	}
 
-	/* Map the I2C BMI088 gyro/accel sensor */
-	dev_dbg(&pdev->dev, "mapping bmi088 gyro/accel sensor\n");
-	mangoh_yellow_driver_data.bmi088a =
-		i2c_new_device(i2c_adapter_primary, &mangoh_yellow_bmi088a_devinfo);
-	if (!mangoh_yellow_driver_data.bmi088a) {
-		dev_err(&pdev->dev, "bmi088 accel sensor is missing\n");
+        /* Map the I2C switch */
+	dev_dbg(&pdev->dev, "mapping i2c switch\n");
+	mangoh_yellow_driver_data.i2c_switch = 
+		i2c_new_device(i2c_adapter_primary, &mangoh_yellow_pca954x_device_info);
+	if (!mangoh_yellow_driver_data.i2c_switch) {
+		dev_err(&pdev->dev, "Failed to register %s\n",
+			mangoh_yellow_pca954x_device_info.type);
 		ret = -ENODEV;
 		goto cleanup;
 	}
 
-	mangoh_yellow_driver_data.bmi088g =
-		i2c_new_device(i2c_adapter_primary, &mangoh_yellow_bmi088g_devinfo);
-	if (!mangoh_yellow_driver_data.bmi088g) {
-		dev_err(&pdev->dev, "bmi088 gyro sensor is missing\n");
+	i2c_adapter_port1 = i2c_get_adapter(MANGOH_YELLOW_I2C_BUS_PORT1);
+	i2c_adapter_port2 = i2c_get_adapter(MANGOH_YELLOW_I2C_BUS_PORT2);
+	i2c_adapter_port3 = i2c_get_adapter(MANGOH_YELLOW_I2C_BUS_PORT3);
+	if (!i2c_adapter_port1 || !i2c_adapter_port2 || !i2c_adapter_port3) {
+		dev_err(&pdev->dev,
+			"Couldn't get necessary I2C buses downstream of I2C switch\n");
+		ret = -ENODEV;
+		goto cleanup;
+	}
+	
+	/* Map the GPIO expander */
+	dev_dbg(&pdev->dev, "mapping the gpio expander\n");
+	mangoh_yellow_driver_data.gpio_expander = 
+		i2c_new_device(i2c_adapter_port3, &mangoh_yellow_gpio_expander_devinfo);
+	
+       		if (!mangoh_yellow_driver_data.gpio_expander) {
+		dev_err(&pdev->dev, "Failed to register %s\n",
+			mangoh_yellow_gpio_expander_devinfo.type);
 		ret = -ENODEV;
 		goto cleanup;
 	}
+	
+	gpio_expander = i2c_get_clientdata(mangoh_yellow_driver_data.gpio_expander);
+
+
+	/* Map the Expander gpios as hardcoded functions */
+	mangoh_yellow_expander_platform_data.gpio_expander_base = gpio_expander->base;
+	ret = platform_device_register(&mangoh_yellow_expander);
+        if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to register expander gpios for hardcoding\n");
+		goto cleanup;
+	}
+	mangoh_yellow_driver_data.expander_registered = true;
+
+        /* Map the I2C BME680 environmental sensor for gas/humidity/temp/pressure sensor */
+	dev_dbg(&pdev->dev, "mapping bme680 gas/temperature/pressure sensor\n");    
+	mangoh_yellow_driver_data.environmental =
+		i2c_new_device(i2c_adapter_port1, &mangoh_yellow_environmental_devinfo);
+	if (!mangoh_yellow_driver_data.environmental) {
+		dev_err(&pdev->dev, "Failed to register environmental sensor %s\n",
+			mangoh_yellow_environmental_devinfo.type);
+		ret = -ENODEV;
+                goto cleanup;
+	}      
+
+        /* Map the I2C BMI160 IMU for gyro/accel/temp sensor */
+	dev_dbg(&pdev->dev, "mapping bmi160 gyro/accel/temp sensor\n"); 
+        mangoh_yellow_driver_data.imu =
+		i2c_new_device(i2c_adapter_port1, &mangoh_yellow_imu_devinfo);
+	if (!mangoh_yellow_driver_data.imu) {
+		dev_err(&pdev->dev, "BMI160 IMU accel/gyro/temp sensor is missing %s\n",
+			mangoh_yellow_imu_devinfo.type);
+		ret = -ENODEV;
+                goto cleanup;
+	}   
+        
+	/* Map the I2C BMM150 magnetometer*/
+	dev_dbg(&pdev->dev, "mapping bmm150 magnetometer sensor\n"); 
+        mangoh_yellow_driver_data.magnetometer =
+		i2c_new_device(i2c_adapter_port1, &mangoh_yellow_magnetometer_devinfo);
+	if (!mangoh_yellow_driver_data.imu) {
+		dev_err(&pdev->dev, "BMM150 sensor is missing %s\n",
+			mangoh_yellow_magnetometer_devinfo.type);
+		ret = -ENODEV;
+                goto cleanup;
+	}   
+        
+
+        /* Map the I2C RTC */
+	dev_dbg(&pdev->dev, "mapping RTC\n"); 
+        mangoh_yellow_driver_data.rtc =
+		i2c_new_device(i2c_adapter_port3, &mangoh_yellow_rtc_devinfo);
+	if (!mangoh_yellow_driver_data.rtc) {
+		dev_err(&pdev->dev, "RTC is missing %s\n",
+			mangoh_yellow_rtc_devinfo.type);
+		ret = -ENODEV;
+		goto cleanup;
+	}
+
+	 /* Map the I2C Battery Charger*/
+	dev_dbg(&pdev->dev, "mapping battery charger\n"); 
+        mangoh_yellow_driver_data.battery_charger =
+		i2c_new_device(i2c_adapter_port2, &mangoh_yellow_battery_charger_devinfo);
+	if (!mangoh_yellow_driver_data.battery_charger) {
+		dev_err(&pdev->dev, "Battery Charger is missing %s\n",
+			mangoh_yellow_battery_charger_devinfo.type);
+		ret = -ENODEV;
+                goto cleanup;
+	}   
+
+	 /* Map the I2C Battery Gauge*/
+	dev_dbg(&pdev->dev, "mapping battery gauge\n"); 
+        mangoh_yellow_driver_data.battery_charger =
+		i2c_new_device(i2c_adapter_port2, &mangoh_yellow_battery_gauge_devinfo);
+	if (!mangoh_yellow_driver_data.battery_gauge) {
+		dev_err(&pdev->dev, "Battery Gauge is missing %s\n",
+			mangoh_yellow_battery_charger_devinfo.type);
+		ret = -ENODEV;
+                goto cleanup;
+	}   
+
+
+ 	/* Map the I2C Light Sensor */
+	dev_dbg(&pdev->dev, "mapping Light Sensor\n"); 
+        mangoh_yellow_light_devinfo.irq = gpio_to_irq(CF3_GPIO36);
+	mangoh_yellow_driver_data.light =
+		i2c_new_device(i2c_adapter_port2, &mangoh_yellow_light_devinfo);
+	if (!mangoh_yellow_driver_data.light) {
+		dev_err(&pdev->dev, "Light Sensor is missing %s\n",
+			mangoh_yellow_light_devinfo.type);
+		ret = -ENODEV;
+                goto cleanup;
+	}   
+
 
 cleanup:
+	i2c_put_adapter(i2c_adapter_port3);
+	i2c_put_adapter(i2c_adapter_port2);
+	i2c_put_adapter(i2c_adapter_port1);
 	i2c_put_adapter(i2c_adapter_primary);
 	if (ret != 0)
 		mangoh_yellow_remove(pdev);
@@ -157,21 +356,42 @@ static int mangoh_yellow_remove(struct platform_device* pdev)
 {
 	struct mangoh_yellow_driver_data *dd = platform_get_drvdata(pdev);
 
-	dev_info(&pdev->dev, "Removing mangoh red platform device\n");
-
-	i2c_unregister_device(dd->bmi088a);
-	i2c_unregister_device(dd->bmi088g);
-	i2c_unregister_device(dd->bme680);
-
+	dev_info(&pdev->dev, "Removing mangoh yellow platform device\n");
+
+        i2c_unregister_device(dd->environmental);
+        i2c_unregister_device(dd->imu);
+	i2c_unregister_device(dd->magnetometer);
+        i2c_unregister_device(dd->light);
+	i2c_unregister_device(dd->battery_charger);
+	i2c_unregister_device(dd->battery_gauge);
+	i2c_unregister_device(dd->rtc);
+	if (dd->expander_registered)
+		platform_device_unregister(&mangoh_yellow_expander);
+	i2c_unregister_device(dd->gpio_expander);
+	i2c_unregister_device(dd->i2c_switch);
+	i2c_unregister_device(dd->eeprom);
 	return 0;
 }
 
+
+static void mangoh_yellow_expander_release(struct device *dev) 
+{
+	/* do nothing*/
+}
 static int __init mangoh_yellow_init(void)
 {
 	platform_driver_register(&mangoh_yellow_driver);
 	printk(KERN_DEBUG "mangoh: registered platform driver\n");
 
-	mangoh_yellow_pdata.board_rev = MANGOH_YELLOW_BOARD_REV_DV1;
+        if ( strcmp(revision, revision_prod) == 0) {
+		mangoh_yellow_pdata.board_rev = MANGOH_YELLOW_BOARD_REV_PROD;
+	} else if (strcmp(revision, revision_dev) == 0) {
+		mangoh_yellow_pdata.board_rev = MANGOH_YELLOW_BOARD_REV_DEV;
+	} else {
+		pr_err("%s:Unsupported mangoh yellow board revision (%s)\n",
+			__func__, revision);
+		return -ENODEV;
+	}
 
 	if (platform_device_register(&mangoh_yellow_device)) {
 		platform_driver_unregister(&mangoh_yellow_driver);

linux_kernel_modules/mangoh/mangoh_yellow_dv1.mdef → linux_kernel_modules/mangoh/mangoh_yellow_dev.mdef

 cflags:
 {
-
+       -I${MANGOH_ROOT}/linux_kernel_modules/expander
+       -I${MANGOH_ROOT}/linux_kernel_modules/opt300x
 }
 
 sources:
@@ -10,7 +11,7 @@ sources:
 
 params:
 {
-    revision = "dv1"
+    revision = "dev"
 }
 
 
@@ -18,7 +19,14 @@ requires:
 {
     kernelModules:
     {
-        $CURDIR/../bme680/bme680-i2c
-        $CURDIR/../bmi088/bmi088-i2c
+
+        $CURDIR/../bmi160/bmi160-i2c
+//        $CURDIR/../bme680/bme680-i2c
+        $CURDIR/../rtc-pcf85063/rtc-pcf85063
+        $CURDIR/../bq25601/bq25601
+//      $CURDIR/../bq27426/bq27426-i2c
+//      $CURDIR/../bmm150/bmm150-i2c
+        $CURDIR/../opt300x/opt300x
+        $CURDIR/../expander/expander
     }
-}
\ No newline at end of file
+}

linux_kernel_modules/opt300x/Kconfig

+
+#
+# Light sensors
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Light sensors"
+
+config OPT3001
+	tristate "Texas Instruments OPT3001 Light Sensor"
+	depends on I2C
+	help
+	  If you say Y or M here, you get support for Texas Instruments
+	  OPT3001 Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  opt3001.
+
+endmenu

linux_kernel_modules/opt300x/README

+Driver files were copied from https://github.com/torvalds/linux/tree/master/drivers/iio/light  in revision 4.18.10

linux_kernel_modules/opt300x/opt300x.c

+/**
+ * opt300x.c - Texas Instruments OPT300x Light Sensor
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Andreas Dannenberg <dannenberg@ti.com>
+ * Based on previous work from: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 of the License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define OPT300x_RESULT		0x00
+#define OPT300x_CONFIGURATION	0x01
+#define OPT300x_LOW_LIMIT	0x02
+#define OPT300x_HIGH_LIMIT	0x03
+#define OPT300x_MANUFACTURER_ID	0x7e
+#define OPT300x_DEVICE_ID	0x7f
+
+#define MANUFACTURER_ID_TI	0x5449
+
+#define OPT300x_CONFIGURATION_RN_MASK	(0xf << 12)
+#define OPT300x_CONFIGURATION_RN_AUTO	(0xc << 12)
+
+#define OPT300x_CONFIGURATION_CT	BIT(11)
+
+#define OPT300x_CONFIGURATION_M_MASK	(3 << 9)
+#define OPT300x_CONFIGURATION_M_SHUTDOWN (0 << 9)
+#define OPT300x_CONFIGURATION_M_SINGLE	(1 << 9)
+#define OPT300x_CONFIGURATION_M_CONTINUOUS (2 << 9) /* also 3 << 9 */
+
+#define OPT300x_CONFIGURATION_OVF	BIT(8)
+#define OPT300x_CONFIGURATION_CRF	BIT(7)
+#define OPT300x_CONFIGURATION_FH	BIT(6)
+#define OPT300x_CONFIGURATION_FL	BIT(5)
+#define OPT300x_CONFIGURATION_L		BIT(4)
+#define OPT300x_CONFIGURATION_POL	BIT(3)
+#define OPT300x_CONFIGURATION_ME	BIT(2)
+
+#define OPT300x_CONFIGURATION_FC_MASK	(3 << 0)
+
+/* The end-of-conversion enable is located in the low-limit register */
+#define OPT300x_LOW_LIMIT_EOC_ENABLE	0xc000
+
+#define OPT300x_REG_EXPONENT(n)		((n) >> 12)
+#define OPT300x_REG_MANTISSA(n)		((n) & 0xfff)
+
+#define OPT300x_INT_TIME_LONG		800000
+#define OPT300x_INT_TIME_SHORT		100000
+
+/*
+ * Time to wait for conversion result to be ready. The device datasheet
+ * sect. 6.5 states results are ready after total integration time plus 3ms.
+ * This results in worst-case max values of 113ms or 883ms, respectively.
+ * Add some slack to be on the safe side.
+ */
+#define OPT300x_RESULT_READY_SHORT	150
+#define OPT300x_RESULT_READY_LONG	1000
+
+
+struct opt300x_scale {
+	int	val;
+	int	val2;
+};
+
+static const struct opt300x_scale opt3001_scales[] = {
+	{
+		.val = 40,
+		.val2 = 950000,
+	},
+	{
+		.val = 81,
+		.val2 = 900000,
+	},
+	{
+		.val = 163,
+		.val2 = 800000,
+	},
+	{
+		.val = 327,
+		.val2 = 600000,
+	},
+	{
+		.val = 655,
+		.val2 = 200000,
+	},
+	{
+		.val = 1310,
+		.val2 = 400000,
+	},
+	{
+		.val = 2620,
+		.val2 = 800000,
+	},
+	{
+		.val = 5241,
+		.val2 = 600000,
+	},
+	{
+		.val = 10483,
+		.val2 = 200000,
+	},
+	{
+		.val = 20966,
+		.val2 = 400000,
+	},
+
+        {
+		.val = 41932,
+		.val2 = 800000,
+	},
+
+	{
+		.val = 83865,
+		.val2 = 600000,
+	},
+};
+
+static const struct opt300x_scale opt3002_scales[] = {
+	{
+		.val =  4914,
+		.val2 = 0,
+	},
+	{
+		.val =  9828,
+		.val2 = 0,
+	},
+	{
+		.val = 19656,
+		.val2 =0,
+	},
+	{
+		.val = 39312,
+		.val2 = 0,
+	},
+	{
+		.val = 78624,
+		.val2 = 0,
+	},
+	{
+		.val = 157248,
+		.val2 = 0,
+	},
+	{
+		.val = 314496,
+		.val2 = 0,
+	},
+	{
+		.val = 628992,
+		.val2 = 0,
+	},
+	{
+		.val = 1257984,
+		.val2 = 0,
+	},
+	{
+		.val = 2515968,
+		.val2 = 0,
+	},
+	{
+		.val = 5031936,
+		.val2 = 0,
+	},
+
+	{
+		.val = 10063872,
+		.val2 = 0,
+	},
+};
+
+
+
+
+
+
+
+struct opt300x_chip {
+	int device_id;
+	u16 multiplier_numerator;
+	u16 multiplier_denominator;
+        const struct opt300x_scale *table;
+	size_t table_num_entries;
+};
+
+static const struct opt300x_chip opt3001_chip = {
+	.device_id = 0x3001,
+	.multiplier_numerator = 1,
+	.multiplier_denominator = 100,
+	.table = opt3001_scales,
+	.table_num_entries = ARRAY_SIZE(opt3001_scales),
+};
+
+static const struct opt300x_chip opt3002_chip = {
+	.device_id = -1,
+	.multiplier_numerator = 6,
+	.multiplier_denominator = 5,
+	.table = opt3001_scales,
+	.table_num_entries = ARRAY_SIZE(opt3002_scales),
+};
+
+struct opt300x {
+	struct i2c_client	*client;
+	struct device		*dev;
+        
+ 	struct opt300x_chip     *chip;
+	struct mutex		lock;
+	bool			ok_to_ignore_lock;
+	bool			result_ready;
+	wait_queue_head_t	result_ready_queue;
+	u16			result;
+
+	u32			int_time;
+	u32			mode;
+
+	u16			high_thresh_mantissa;
+	u16			low_thresh_mantissa;
+
+	u8			high_thresh_exp;
+	u8			low_thresh_exp;
+
+	bool			use_irq;
+};
+
+static int opt300x_find_scale(const struct opt300x *opt, int val,
+		int val2, u8 *exponent)
+{
+	int i;
+
+	for (i = 0; i < opt->chip->table_num_entries; i++) {
+		const struct opt300x_scale *scale = &opt->chip->table[i];
+
+		/*
+		 * Combine the integer and micro parts for comparison
+		 * purposes. Use milli lux precision to avoid 32-bit integer
+		 * overflows.
+		 */
+		if ((val * 1000 + val2 / 1000) <=
+				(scale->val * 1000 + scale->val2 / 1000)) {
+			*exponent = i;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static void opt300x_to_iio_ret(struct opt300x *opt, u8 exponent,
+		u16 mantissa, int *val, int *val2)
+{
+	int lux;
+        u16  multiplier1 = opt->chip->multiplier_numerator;
+        u16  multiplier2 = opt->chip->multiplier_denominator; 
+	lux = (1000000/multiplier2)* (mantissa << exponent)*multiplier1;
+	*val = lux /1000000;
+	*val2 = lux - (1000000*(*val));
+}
+
+static void opt300x_set_mode(struct opt300x *opt, u16 *reg, u16 mode)
+{
+	*reg &= ~OPT300x_CONFIGURATION_M_MASK;
+	*reg |= mode;
+	opt->mode = mode;
+}
+
+static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.8");
+
+static struct attribute *opt300x_attributes[] = {
+	&iio_const_attr_integration_time_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group opt300x_attribute_group = {
+	.attrs = opt300x_attributes,
+};
+
+static const struct iio_event_spec opt300x_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec opt300x_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				BIT(IIO_CHAN_INFO_INT_TIME),
+		.event_spec = opt300x_event_spec,
+		.num_event_specs = ARRAY_SIZE(opt300x_event_spec),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int opt300x_get_lux(struct opt300x *opt, int *val, int *val2)
+{
+	int ret;
+	u16 mantissa;
+	u16 reg;
+	u8 exponent;
+	u16 value;
+	long timeout;
+
+	if (opt->use_irq) {
+		/*
+		 * Enable the end-of-conversion interrupt mechanism. Note that
+		 * doing so will overwrite the low-level limit value however we
+		 * will restore this value later on.
+		 */
+		ret = i2c_smbus_write_word_swapped(opt->client,
+					OPT300x_LOW_LIMIT,
+					OPT300x_LOW_LIMIT_EOC_ENABLE);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to write register %02x\n",
+					OPT300x_LOW_LIMIT);
+			return ret;
+		}
+
+		/* Allow IRQ to access the device despite lock being set */
+		opt->ok_to_ignore_lock = true;
+	}
+
+	/* Reset data-ready indicator flag */
+	opt->result_ready = false;
+
+	/* Configure for single-conversion mode and start a new conversion */
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_CONFIGURATION);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_CONFIGURATION);
+		goto err;
+	}
+
+	reg = ret;
+	opt300x_set_mode(opt, &reg, OPT300x_CONFIGURATION_M_SINGLE);
+
+	ret = i2c_smbus_write_word_swapped(opt->client, OPT300x_CONFIGURATION,
+			reg);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to write register %02x\n",
+				OPT300x_CONFIGURATION);
+		goto err;
+	}
+
+	if (opt->use_irq) {
+		/* Wait for the IRQ to indicate the conversion is complete */
+		ret = wait_event_timeout(opt->result_ready_queue,
+				opt->result_ready,
+				msecs_to_jiffies(OPT300x_RESULT_READY_LONG));
+	} else {
+		/* Sleep for result ready time */
+		timeout = (opt->int_time == OPT300x_INT_TIME_SHORT) ?
+			OPT300x_RESULT_READY_SHORT : OPT300x_RESULT_READY_LONG;
+		msleep(timeout);
+
+		/* Check result ready flag */
+		ret = i2c_smbus_read_word_swapped(opt->client,
+						  OPT300x_CONFIGURATION);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_CONFIGURATION);
+			goto err;
+		}
+
+		if (!(ret & OPT300x_CONFIGURATION_CRF)) {
+			ret = -ETIMEDOUT;
+			goto err;
+		}
+
+		/* Obtain value */
+		ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_RESULT);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_RESULT);
+			goto err;
+		}
+		opt->result = ret;
+		opt->result_ready = true;
+	}
+
+err:
+	if (opt->use_irq)
+		/* Disallow IRQ to access the device while lock is active */
+		opt->ok_to_ignore_lock = false;
+
+	if (ret == 0)
+		return -ETIMEDOUT;
+	else if (ret < 0)
+		return ret;
+
+	if (opt->use_irq) {
+		/*
+		 * Disable the end-of-conversion interrupt mechanism by
+		 * restoring the low-level limit value (clearing
+		 * OPT300x_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing
+		 * those enable bits would affect the actual limit value due to
+		 * bit-overlap and therefore can't be done.
+		 */
+		value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
+		ret = i2c_smbus_write_word_swapped(opt->client,
+						   OPT300x_LOW_LIMIT,
+						   value);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to write register %02x\n",
+					OPT300x_LOW_LIMIT);
+			return ret;
+		}
+	}
+
+	exponent = OPT300x_REG_EXPONENT(opt->result);
+	mantissa = OPT300x_REG_MANTISSA(opt->result);
+
+	opt300x_to_iio_ret(opt, exponent, mantissa, val, val2);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int opt300x_get_int_time(struct opt300x *opt, int *val, int *val2)
+{
+	*val = 0;
+	*val2 = opt->int_time;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int opt300x_set_int_time(struct opt300x *opt, int time)
+{
+	int ret;
+	u16 reg;
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_CONFIGURATION);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_CONFIGURATION);
+		return ret;
+	}
+
+	reg = ret;
+
+	switch (time) {
+	case OPT300x_INT_TIME_SHORT:
+		reg &= ~OPT300x_CONFIGURATION_CT;
+		opt->int_time = OPT300x_INT_TIME_SHORT;
+		break;
+	case OPT300x_INT_TIME_LONG:
+		reg |= OPT300x_CONFIGURATION_CT;
+		opt->int_time = OPT300x_INT_TIME_LONG;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return i2c_smbus_write_word_swapped(opt->client, OPT300x_CONFIGURATION,
+			reg);
+}
+
+static int opt300x_read_raw(struct iio_dev *iio,
+		struct iio_chan_spec const *chan, int *val, int *val2,
+		long mask)
+{
+	struct opt300x *opt = iio_priv(iio);
+	int ret;
+
+	if (opt->mode == OPT300x_CONFIGURATION_M_CONTINUOUS)
+		return -EBUSY;
+
+	if (chan->type != IIO_LIGHT)
+		return -EINVAL;
+
+	mutex_lock(&opt->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = opt300x_get_lux(opt, val, val2);
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		ret = opt300x_get_int_time(opt, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&opt->lock);
+
+	return ret;
+}
+
+static int opt300x_write_raw(struct iio_dev *iio,
+		struct iio_chan_spec const *chan, int val, int val2,
+		long mask)
+{
+	struct opt300x *opt = iio_priv(iio);
+	int ret;
+
+	if (opt->mode == OPT300x_CONFIGURATION_M_CONTINUOUS)
+		return -EBUSY;
+
+	if (chan->type != IIO_LIGHT)
+		return -EINVAL;
+
+	if (mask != IIO_CHAN_INFO_INT_TIME)
+		return -EINVAL;
+
+	if (val != 0)
+		return -EINVAL;
+
+	mutex_lock(&opt->lock);
+	ret = opt300x_set_int_time(opt, val2);
+	mutex_unlock(&opt->lock);
+
+	return ret;
+}
+
+static int opt300x_read_event_value(struct iio_dev *iio,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info,
+		int *val, int *val2)
+{
+	struct opt300x *opt = iio_priv(iio);
+	int ret = IIO_VAL_INT_PLUS_MICRO;
+
+	mutex_lock(&opt->lock);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		opt300x_to_iio_ret(opt, opt->high_thresh_exp,
+				opt->high_thresh_mantissa, val, val2);
+		break;
+	case IIO_EV_DIR_FALLING:
+		opt300x_to_iio_ret(opt, opt->low_thresh_exp,
+				opt->low_thresh_mantissa, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&opt->lock);
+
+	return ret;
+}
+
+static int opt300x_write_event_value(struct iio_dev *iio,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info,
+		int val, int val2)
+{
+	struct opt300x *opt = iio_priv(iio);
+	int ret;
+
+	u16 mantissa;
+	u16 value;
+	u16 reg;
+
+	u8 exponent;
+
+	if (val < 0)
+		return -EINVAL;
+
+	mutex_lock(&opt->lock);
+
+	ret = opt300x_find_scale(opt, val, val2, &exponent);
+	if (ret < 0) {
+		dev_err(opt->dev, "can't find scale for %d.%06u\n", val, val2);
+		goto err;
+	}
+
+	mantissa = (((val * 1000) + (val2 / 1000)) / 10) >> exponent;
+	value = (exponent << 12) | mantissa;
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		reg = OPT300x_HIGH_LIMIT;
+		opt->high_thresh_mantissa = mantissa;
+		opt->high_thresh_exp = exponent;
+		break;
+	case IIO_EV_DIR_FALLING:
+		reg = OPT300x_LOW_LIMIT;
+		opt->low_thresh_mantissa = mantissa;
+		opt->low_thresh_exp = exponent;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = i2c_smbus_write_word_swapped(opt->client, reg, value);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to write register %02x\n", reg);
+		goto err;
+	}
+
+err:
+	mutex_unlock(&opt->lock);
+
+	return ret;
+}
+
+static int opt300x_read_event_config(struct iio_dev *iio,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir)
+{
+	struct opt300x *opt = iio_priv(iio);
+
+	return opt->mode == OPT300x_CONFIGURATION_M_CONTINUOUS;
+}
+
+static int opt300x_write_event_config(struct iio_dev *iio,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, int state)
+{
+	struct opt300x *opt = iio_priv(iio);
+	int ret;
+	u16 mode;
+	u16 reg;
+
+	if (state && opt->mode == OPT300x_CONFIGURATION_M_CONTINUOUS)
+		return 0;
+
+	if (!state && opt->mode == OPT300x_CONFIGURATION_M_SHUTDOWN)
+		return 0;
+
+	mutex_lock(&opt->lock);
+
+	mode = state ? OPT300x_CONFIGURATION_M_CONTINUOUS
+		: OPT300x_CONFIGURATION_M_SHUTDOWN;
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_CONFIGURATION);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_CONFIGURATION);
+		goto err;
+	}
+
+	reg = ret;
+	opt300x_set_mode(opt, &reg, mode);
+
+	ret = i2c_smbus_write_word_swapped(opt->client, OPT300x_CONFIGURATION,
+			reg);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to write register %02x\n",
+				OPT300x_CONFIGURATION);
+		goto err;
+	}
+
+err:
+	mutex_unlock(&opt->lock);
+
+	return ret;
+}
+
+static const struct iio_info opt300x_info = {
+	.attrs = &opt300x_attribute_group,
+	.read_raw = opt300x_read_raw,
+	.write_raw = opt300x_write_raw,
+	.read_event_value = opt300x_read_event_value,
+	.write_event_value = opt300x_write_event_value,
+	.read_event_config = opt300x_read_event_config,
+	.write_event_config = opt300x_write_event_config,
+};
+
+static int opt300x_read_id(struct opt300x *opt)
+{
+	u16 manufacturer;
+	u16 device_id;
+	int ret;
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_MANUFACTURER_ID);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_MANUFACTURER_ID);
+		return ret;
+	}
+
+	manufacturer = ret;
+	if (manufacturer != MANUFACTURER_ID_TI) {
+		dev_err(opt->dev, "Invalid manufacturer ID (%u)\n",
+				manufacturer);
+		return -ENODEV;
+	}
+
+
+	if (opt->chip->device_id >= 0) {
+		ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_DEVICE_ID);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to read register %02x\n",
+					OPT300x_DEVICE_ID);
+			return ret;
+		}
+		device_id = ret;
+		
+		if (device_id != opt->chip->device_id) {
+			//dev_err("opt->dev, Invalid Device id %d", device_id);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static int opt300x_configure(struct opt300x *opt)
+{
+	int ret;
+	u16 reg;
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_CONFIGURATION);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_CONFIGURATION);
+		return ret;
+	}
+
+	reg = ret;
+
+	/* Enable automatic full-scale setting mode */
+	reg &= ~OPT300x_CONFIGURATION_RN_MASK;
+	reg |= OPT300x_CONFIGURATION_RN_AUTO;
+
+	/* Reflect status of the device's integration time setting */
+	if (reg & OPT300x_CONFIGURATION_CT)
+		opt->int_time = OPT300x_INT_TIME_LONG;
+	else
+		opt->int_time = OPT300x_INT_TIME_SHORT;
+
+	/* Ensure device is in shutdown initially */
+	opt300x_set_mode(opt, &reg, OPT300x_CONFIGURATION_M_SHUTDOWN);
+
+	/* Configure for latched window-style comparison operation */
+	reg |= OPT300x_CONFIGURATION_L;
+	reg &= ~OPT300x_CONFIGURATION_POL;
+	reg &= ~OPT300x_CONFIGURATION_ME;
+	reg &= ~OPT300x_CONFIGURATION_FC_MASK;
+
+	ret = i2c_smbus_write_word_swapped(opt->client, OPT300x_CONFIGURATION,
+			reg);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to write register %02x\n",
+				OPT300x_CONFIGURATION);
+		return ret;
+	}
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_LOW_LIMIT);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_LOW_LIMIT);
+		return ret;
+	}
+
+	opt->low_thresh_mantissa = OPT300x_REG_MANTISSA(ret);
+	opt->low_thresh_exp = OPT300x_REG_EXPONENT(ret);
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_HIGH_LIMIT);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_HIGH_LIMIT);
+		return ret;
+	}
+
+	opt->high_thresh_mantissa = OPT300x_REG_MANTISSA(ret);
+	opt->high_thresh_exp = OPT300x_REG_EXPONENT(ret);
+
+	return 0;
+}
+
+static irqreturn_t opt300x_irq(int irq, void *_iio)
+{
+	struct iio_dev *iio = _iio;
+	struct opt300x *opt = iio_priv(iio);
+	int ret;
+
+	if (!opt->ok_to_ignore_lock)
+		mutex_lock(&opt->lock);
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_CONFIGURATION);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_CONFIGURATION);
+		goto out;
+	}
+
+	if ((ret & OPT300x_CONFIGURATION_M_MASK) ==
+			OPT300x_CONFIGURATION_M_CONTINUOUS) {
+		if (ret & OPT300x_CONFIGURATION_FH)
+			iio_push_event(iio,
+					IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+							IIO_EV_TYPE_THRESH,
+							IIO_EV_DIR_RISING),
+					iio_get_time_ns());
+		if (ret & OPT300x_CONFIGURATION_FL)
+			iio_push_event(iio,
+					IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+							IIO_EV_TYPE_THRESH,
+							IIO_EV_DIR_FALLING),
+					iio_get_time_ns());
+	} else if (ret & OPT300x_CONFIGURATION_CRF) {
+		ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_RESULT);
+		if (ret < 0) {
+			dev_err(opt->dev, "failed to read register %02x\n",
+					OPT300x_RESULT);
+			goto out;
+		}
+		opt->result = ret;
+		opt->result_ready = true;
+		wake_up(&opt->result_ready_queue);
+	}
+
+out:
+	if (!opt->ok_to_ignore_lock)
+		mutex_unlock(&opt->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int opt300x_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+        struct opt300x_chip *c = (struct opt300x_chip *)id->driver_data;
+	struct iio_dev *iio;
+	struct opt300x *opt;
+	int irq = client->irq;
+	int ret;
+
+	iio = devm_iio_device_alloc(dev, sizeof(*opt));
+	if (!iio)
+		return -ENOMEM;
+
+	opt = iio_priv(iio);
+	opt->client = client;
+	opt->dev = dev;
+        opt->chip = c;
+	mutex_init(&opt->lock);
+	init_waitqueue_head(&opt->result_ready_queue);
+	i2c_set_clientdata(client, iio);
+
+	ret = opt300x_read_id(opt);
+	if (ret)
+		return ret;
+	dev_info(dev, "Found %s\n", id->name);
+
+	ret = opt300x_configure(opt);
+	if (ret)
+		return ret;
+
+	iio->name = client->name;
+	iio->channels = opt300x_channels;
+	iio->num_channels = ARRAY_SIZE(opt300x_channels);
+	iio->dev.parent = dev;
+	iio->modes = INDIO_DIRECT_MODE;
+	iio->info = &opt300x_info;
+
+	ret = devm_iio_device_register(dev, iio);
+	if (ret) {
+		dev_err(dev, "failed to register IIO device\n");
+		return ret;
+	}
+
+	/* Make use of INT pin only if valid IRQ no. is given */
+	if (irq > 0) {
+		ret = request_threaded_irq(irq, NULL, opt300x_irq,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"opt300x", iio);
+		if (ret) {
+			dev_err(dev, "failed to request IRQ #%d\n", irq);
+			return ret;
+		}
+		opt->use_irq = true;
+	} else {
+		dev_dbg(opt->dev, "enabling interrupt-less operation\n");
+	}
+
+	return 0;
+}
+
+static int opt300x_remove(struct i2c_client *client)
+{
+	struct iio_dev *iio = i2c_get_clientdata(client);
+	struct opt300x *opt = iio_priv(iio);
+	int ret;
+	u16 reg;
+
+	if (opt->use_irq)
+		free_irq(client->irq, iio);
+
+	ret = i2c_smbus_read_word_swapped(opt->client, OPT300x_CONFIGURATION);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to read register %02x\n",
+				OPT300x_CONFIGURATION);
+		return ret;
+	}
+
+	reg = ret;
+	opt300x_set_mode(opt, &reg, OPT300x_CONFIGURATION_M_SHUTDOWN);
+
+	ret = i2c_smbus_write_word_swapped(opt->client, OPT300x_CONFIGURATION,
+			reg);
+	if (ret < 0) {
+		dev_err(opt->dev, "failed to write register %02x\n",
+				OPT300x_CONFIGURATION);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id opt300x_id[] = {
+	{ "opt3001", (kernel_ulong_t)&opt3001_chip },
+	{ "opt3002", (kernel_ulong_t)&opt3002_chip },
+        { } /* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(i2c, opt300x_id);
+
+static const struct of_device_id opt300x_of_match[] = {
+	{ .compatible = "ti,opt3001" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, opt300x_of_match);
+
+static struct i2c_driver opt300x_driver = {
+	.probe = opt300x_probe,
+	.remove = opt300x_remove,
+	.id_table = opt300x_id,
+
+	.driver = {
+		.name = "opt300x",
+		.of_match_table = of_match_ptr(opt300x_of_match),
+	},
+};
+
+module_i2c_driver(opt300x_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments OPT300x Light Sensor Driver");

linux_kernel_modules/opt300x/opt300x.mdef

+sources:
+{
+    opt300x.c
+}

linux_kernel_modules/rtc_sync/rtc_sync.mdef

@@ -8,6 +8,6 @@ requires:
     kernelModules:
     {
         $CURDIR/../rtc-pcf85063/rtc-pcf85063
-        $CURDIR/../mangoh/mangoh_yellow
+        $CURDIR/../mangoh/mangoh_yellow_dev
     }
 }

mangOH.sdef

@@ -61,7 +61,6 @@ apps:
     $LEGATO_ROOT/apps/tools/devMode
 
 #if ${MANGOH_BOARD} = YELLOW
-    $MANGOH_ROOT/samples/BoschSensorsMonitor/boschSensorsMonitor
 #endif
 }
 
@@ -107,6 +106,7 @@ kernelModules:
      * Dependencies of the above kernel modules - must be listed explicitly in the SDEF due to the
      * way that Legato kernel module dependencies work
      */
+
     $CURDIR/linux_kernel_modules/led/led
     $CURDIR/linux_kernel_modules/bq24296/bq24296
     $CURDIR/linux_kernel_modules/ltc294x/ltc294x
@@ -160,13 +160,26 @@ kernelModules:
     $CURDIR/linux_kernel_modules/lsm6ds3/lsm6ds3-i2c
     $CURDIR/linux_kernel_modules/lsm6ds3/lsm6ds3
 #elif ${MANGOH_BOARD} = YELLOW
-    $CURDIR/linux_kernel_modules/mangoh/mangoh_yellow_dv1
+    $CURDIR/linux_kernel_modules/mangoh/mangoh_yellow_dev
+#if ${MANGOH_KERNEL_LACKS_IIO} = 1
+    $CURDIR/linux_kernel_modules/iio/iio-triggered-buffer
+    $CURDIR/linux_kernel_modules/iio/iio-kfifo-buf
+    $CURDIR/linux_kernel_modules/iio/iio
+#endif // MANGOH_KERNEL_LACKS_IIO
+
+    // $CURDIR/linux_kernel_modules/bme680/bme680-i2c
+    // $CURDIR/linux_kernel_modules/bme680/bme680
+
+    $CURDIR/linux_kernel_modules/bmi160/bmi160-i2c
+    $CURDIR/linux_kernel_modules/bmi160/bmi160
+
+    $CURDIR/linux_kernel_modules/rtc-pcf85063/rtc-pcf85063
+    $CURDIR/linux_kernel_modules/rtc_sync/rtc_sync
+    $CURDIR/linux_kernel_modules/bq25601/bq25601
+    // $CURDIR/linux_kernel_modules/bq27426/bq27426-i2c
+    // $CURDIR/linux_kernel_modules/bmm150/bmm150-i2c
+    $CURDIR/linux_kernel_modules/opt300x/opt300x
+    $CURDIR/linux_kernel_modules/expander/expander
 
-    /*
-     * Dependencies of the above kernel modules - must be listed explicitly in the SDEF due to the
-     * way that Legato kernel module dependencies work
-     */
-    $CURDIR/linux_kernel_modules/bme680/bme680-i2c
-    $CURDIR/linux_kernel_modules/bmi088/bmi088-i2c
 #endif // MANGOH_BOARD
 }